I got my lathe servos running and have been trying to tune and test. I keep getting an axis 2 following error during rapids. I changed the axis 2 maximum velocity using Axis screen Machine->Calibration and using gedit. No mater what I try, my axis 2 maximum velocity changes itself back to 1 inch/second. The PID values change when I change them, but the maximum velocity sets itself back to 1. I change it to 5, click TEST, OK, SAVE TO FILE, then when I reload, it's back to 1.0...
The system is an Anilam LatheMate in process of being converted to EMC2 with M5i20 configuration. Thanks! Roger Neal [EMAIL PROTECTED] ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
