John Kasunich wrote: > > It sounds like you are losing position during rapid moves only. The > move between letters is probably a G0 rapid, which goes as fast as EMC > thinks the machine can go, while the moves within the letters are G1 > lines or G2/G3 arcs, both at some specified feedrate. > A quick test is to use a text editor to change all ocurrences G0 or G00 to G01, and re-run the test. If the results are different, this strongly confirms John's thinking above.
Jon ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users