On Sat, 9 Aug 2008, Eric H. Johnson wrote:
> Date: Sat, 9 Aug 2008 09:19:44 -0400
> From: Eric H. Johnson <[EMAIL PROTECTED]>
> Reply-To: "Enhanced Machine Controller (EMC)"
> <emc-users@lists.sourceforge.net>
> To: "'Enhanced Machine Controller (EMC)'" <emc-users@lists.sourceforge.net>
> Subject: Re: [Emc-users] Stepper configuration
>
> Sebastian,
>
> Thanks. A couple more questions.
>
> 1> I assume I will have to build from source to use hostmot2?
>
> 2> On an m5i20, how do you use the general purpose I/O? I don't see, for
> instance, the equivalents of:
> addf m5i20.0.misc-update servo-thread 1
> addf m5i20.0.digital-in-read servo-thread 1
> addf m5i20.0.digital-out-write servo-thread -1
>
> 3> What are the pinouts? Do they remain the same for P3 and P4 as with the
> standard m5i20 configuration.
If you download the 5I20 support package from Mesa, the pinout files for
some HostMot2 configurations are in the HOSTMOT2 directory, they are .PIN
files. I think Sebastians driver can print out the pinouts as well (the pinout
is embedded in the FPGA configuration).
>
> Regards,
> Eric
>
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
