> >>
> >> I was looking for Mesa combination with 5i25 + daughtercard but I need
> >> outputs for 6 steppers because of gantry construction of machine frame.
> >> 7i76 has 5 "dedicated" outputs. Can I use other outputs for motor as well?
>
> The default 5I25 config when used with the 7I76 is a dual 7I76 configuration
> so there are actually 10 step generators available. As Viesturs says, you can
> connect most step motor drives directly to the 5I25 so you can have a
> 5I25/7I76 for 5 stepgens and 48 I/O points and then connect one or more
> additional step drives directly to the second 5I25 connector. If you have a
> small system with 5V limit switches, you can get away without any daughter
> cards at all or perhaps 7I75 I/O breakout/protectors only
>
So I guess then I could use existing two C10 breakout boards in combination
with 5i25???
------------------------------------------------------------------------------
Write once. Port to many.
Get the SDK and tools to simplify cross-platform app development. Create
new or port existing apps to sell to consumers worldwide. Explore the
Intel AppUpSM program developer opportunity. appdeveloper.intel.com/join
http://p.sf.net/sfu/intel-appdev
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
