On Fri, 2012-02-03 at 11:38 -0800, Kirk Wallace wrote: > On Thu, 2012-02-02 at 19:50 -0800, Kirk Wallace wrote: > > I'm trying to get my SJ200 VFD connected with Modbus. In preparation for > > this I ported a MVX9000 which I had on the shelf. It turned out to be a > > slam dunk, almost. > > http://www.wallacecompany.com/machine_shop/EMC2/mvx9000/ > > I've noticed on the different versions of VFD C file derived components > there is a usage message at the top of the source file then a usage ... snip
I have some more thoughts on VFD components. My plan for my SJ200 component was to have a bare-bones version that let one operate speed, direction and maybe a fault signal, then a more complete version with more features, but still only those necessary for machine operation and monitoring, and finally have a component meant to run separately from LinuxCNC that would allow setting registers relevant to features such as for tuning the system for the motor being used. Just a thought. -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/index.html California, USA ------------------------------------------------------------------------------ Try before you buy = See our experts in action! The most comprehensive online learning library for Microsoft developers is just $99.99! Visual Studio, SharePoint, SQL - plus HTML5, CSS3, MVC3, Metro Style Apps, more. Free future releases when you subscribe now! http://p.sf.net/sfu/learndevnow-dev2 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users