On Fri, 27 Jul 2012, Bryce Johnson wrote: > Date: Fri, 27 Jul 2012 11:29:20 -0500 > From: Bryce Johnson <sie...@gmail.com> > Reply-To: "Enhanced Machine Controller (EMC)" > <emc-users@lists.sourceforge.net> > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > Subject: Re: [Emc-users] xml for G540 and pncconf with 5i25? > > Is this how you would configure the hal? > > setp hm2_5i25.0.stepgen.04.steplen 10000 > setp hm2_5i25.0.stepgen.04.stepspace 10000 > setp hm2_5i25.0.stepgen.04.step_type 2 > setp hm2_5i25.0.stepgen.04.control-type 1 > setp hm2_5i25.0.stepgen.04.enable 1 > setp hm2_5i25.0.stepgen.04.velocity-cmd .25 > > I thought that seemed like everything but I can't get it to work. Also I > loaded the G540x2.bit file into the mesa. > > On Tue, Jul 24, 2012 at 10:47 PM, Peter C. Wallace <p...@mesanet.com> wrote:
You would need to set the stepgens position scale to 10000 to get a 10KHz square wave. Peter Wallace Mesa Electronics ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
