On Thu, 28 Sep 2023 10:36:15 -0700 Marc MERLIN <marc_...@merlins.org> said:
> On Sun, Sep 10, 2023 at 12:14:21PM +0100, Carsten Haitzler wrote: > > > Basically I have this problem: > > > sauron:~$ xset q | tail -4 > > > DPMS (Energy Star): > > > Standby: 300 Suspend: 360 Off: 420 > > > DPMS is Enabled > > > Monitor is On > > > sauron:~$ enlightenment_remote -desktop-lock > > > sauron:~$ xset q | tail -4 > > > DPMS (Energy Star): > > > Standby: 11 Suspend: 12 Off: 13 > > > DPMS is Enabled > > > Monitor is On > > > > > > I looked in the E settings, my blanking timeout is minutes, and my > > > special timeout when locked is 17 seconds > > > > > > I cannot find where DPMS 11, 12, 11 comes from. > > > > e just sets those to timeout + 10, 11, 12 - so screen blanking time is 1. i > > don't see this ever happen - i can't really say much. i do not know what > > logic path causes this. > > Thanks for having a look. On my side it's not happening reliably, so > havne't pinned it down, although it's definitely linked to the > screensaver having reset this by the time I unlock the screen. > I a using E's built in screensaver. I guess I could switch back to xlock > > I just locked with E CTRL+ALT+L, unlocked, and immediately see: > Screen Saver: > prefer blanking: yes allow exposures: yes > timeout: 300 cycle: 300 > > DPMS (Energy Star): > Standby: 11 Suspend: 12 Off: 13 > DPMS is Enabled > > > there it's set to 10 sec. 0 will turn this feature off so it'll just have > > the usual blanking timeout (e.g. 10min/600sec in this case). once you > > unlock the screensaver blanking time should go back to the normal amount. > > you may find the screensaver timeout will be LESS because of backlight > > dimming. i had it off in the above example. if i have it on and set to 5 > > seconds like: > > > > http://www.enlightenment.org/ss/e-64fda48aa43879.64018673.png > > mmh, bummer, looks like the SS is gone already. > > I assume you referred to "special timeout when screen is locked"? > If so, I tried to set it to 0, but locking and unlocking brought me back to > Screen Saver: > prefer blanking: yes allow exposures: yes > timeout: 300 cycle: 300 > DPMS (Energy Star): > Standby: 11 Suspend: 12 Off: 13 > DPMS is Enabled > Monitor is On > > So, no dice. > > Any idea what I can try to tweak outside of removing the E screensaver > altogether? go to the code and start tracing the logic and modify - add debug until you find the bit that causes it. i know you're capable of it (just adding printfs and following functions calling functions) :) -- ------------- Codito, ergo sum - "I code, therefore I am" -------------- Carsten Haitzler - ras...@rasterman.com _______________________________________________ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users