I had the same problem - I do not think you have all the error listed. In my case there appeared to be a dependency problem with automake.
I manually reinstalled/upgraged automake first then did a selfupdate. That solved the problem. Mike > Hi everybody, > > I ran into the following error when when tried my regular > "fink-selfupdate-cvs" and "fink update-all" commands: > > Errors were encountered while processing: > > /sw/fink/dists/unstable/main/binary-darwin-powerpc/devel/ > autoconf2.5_2.54-1_darwin-powerpc.deb > ### execution of dpkg failed, exit code 1 > Failed: can't install package autoconf2.5-2.54-1 > > Any ideas what's wrong? > > Thanks for any help... > > Andreas > > > > ------------------------------------------------------- > This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts > will > allow you to extend the highest allowed 128 bit encryption to all your > clients even if they use browsers that are limited to 40 bit encryption. > Get a guide > here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en > _______________________________________________ > Fink-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/fink-users ------------------------------------------------------- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en _______________________________________________ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users