Hi,
this patch will propagate zero volt to the output properties
when...there is no current at all.
Atm if you switch all inputs off (alt & bat switches) you still have 24v
at the outputs.
Harald.
Index: electrical.cxx
===================================================================
RCS file: /var/cvs/FlightGear-0.9/source/src/Systems/electrical.cxx,v
retrieving revision 1.35.2.1
diff -u -r1.35.2.1 electrical.cxx
--- electrical.cxx 11 May 2007 18:00:05 -0000 1.35.2.1
+++ electrical.cxx 19 May 2007 09:19:22 -0000
@@ -428,16 +428,16 @@
// zero out the voltage before we start, but don't clear the
// requested load values.
for ( i = 0; i < suppliers.size(); ++i ) {
- suppliers[i]->set_volts( 0.0 );
+ suppliers[i]->set_volts( -0.01 );
}
for ( i = 0; i < buses.size(); ++i ) {
- buses[i]->set_volts( 0.0 );
+ buses[i]->set_volts( -0.01 );
}
for ( i = 0; i < outputs.size(); ++i ) {
- outputs[i]->set_volts( 0.0 );
+ outputs[i]->set_volts( -0.01 );
}
for ( i = 0; i < connectors.size(); ++i ) {
- connectors[i]->set_volts( 0.0 );
+ connectors[i]->set_volts( -0.01 );
}
// for each "external" supplier, propagate the electrical current
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Flightgear-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/flightgear-devel
