Gentlemen:
I have seen this many times. I believe this happens when CP's are
too loaded. Usually happens on older equipment (ie/ CP10's) but I have seen
it on newer processors that are over worked. (ie/ you are seeing OM & BPC
overruns).
Here are two things to try:
1) Upload 1 compound at a time (either from within ICC or by creating
an ICC driver-task script).
2) Wait for the process to be shutdown (CP's are less worked and
network traffic is lower) Not only will you get your upload but this
actually has an added bonus as the operator settable parameters are in a
state where the plant has been "shut-down properly". Thus if you ever have
to do a loadall to the CP the settable parameters are in a quiescent state
and you don't have valves/dampers/etc jumping to some "normal operating
position"
Peace
Peter
----------
From: Airhart, Chad M.
Sent: Monday, September 24, 2001 1:55 PM
To: 'Foxboro DCS Mail List'
Subject: RE: upload timeout errors
We have had this same problem for over 2 years now. Various field
service
people and TAC have looked at it and been unable to determine the
root of
the problem. We have upgraded our RAM, upgraded our hard drives all
to no
avail. So far Foxboro has been little to no help in resolving the
problem.
It has been extremely frustrating.
Chad Airhart
Senior Instrument, Electrical & Control Systems Engineer
Equistar Chemicals, LP.
Victoria, TX
Wk. (361) 572-2568
Pgr. (361) 270-2214 alpha messaging at [EMAIL PROTECTED]
Fx. (361) 572-2541
> -----Original Message-----
> From: Navarro, Douglas [SMTP:[EMAIL PROTECTED]]
> Sent: Monday, September 24, 2001 10:44 AM
> To: Foxboro
> Subject: upload timeout errors
>
> List members,
>
> We have been experiencing some problems with our I/A system when
we try to
> upload
> from the CPs. These are the type of error message we get
>
> Object Mgr omread() timeout
> Error on parameter FKCP02_ECB:FK2B05.BADRNG
> --- UPLOAD ABORTED --- at compound/block FKCP02_ECB:FK2B05
>
> Object Mgr omread() timeout
> Error on parameter SATEL1_STA:STATION.AUTCKP
> --- UPLOAD ABORTED --- at compound/block SATEL1_STA:STATION
>
> This error occurs almost all the time and with any parameter of
any
> variable.
> I would appreciate if anybody has any insight into this kind of
problem.
>
> Regards,
>
> Douglas Navarro
> PDVSA
> Tel. 58-269-2406955
> Fax 58-269-2405240
> email: [EMAIL PROTECTED]
>
>
>
> *************** PDVSA´S INTERNET E-MAIL USE ***************
> This message may contain information solely of the interest of
PDVSA or
> its businesses. Copying, distribution, disclosure or any use
of the
> information contained in this transmission is permitted
only to
> authorized parties. If you have received this e-mail by error,
please
> destroy it and notify [EMAIL PROTECTED] or the sender by reply
email.
>
> ****** USO DEL CORREO ELECTRONICO DE PDVSA HACIA INTERNET ******
> Esta nota puede contener informacion de interes solo para PDVSA
o sus
> negocios. Solo esta permitida su copia, distribucion o uso a
personas
> autorizadas. Si recibio esta nota por error, por favor
destruyala y
> notifique al remitente o a [EMAIL PROTECTED]
>
>
>
-----------------------------------------------------------------------
> This list is neither sponsored nor endorsed by the Foxboro
Company. All
> postings from this list are the work of list subscribers and no
warranty
> is made or implied as to the accuracy of any information
disseminated
> through this medium. By subscribing to this list you agree to hold
the
> list sponsor(s) blameless for any and all mishaps which might
occur due to
>
> your application of information received from this mailing list.
>
> To be removed from this list, send mail to
> [EMAIL PROTECTED]
> with "unsubscribe foxboro" in the Subject. Or, send any mail to
> [EMAIL PROTECTED]
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company.
All postings from this list are the work of list subscribers and no warranty
is made or implied as to the accuracy of any information disseminated
through this medium. By subscribing to this list you agree to hold the list
sponsor(s) blameless for any and all mishaps which might occur due to your
application of information received from this mailing list.
To be removed from this list, send mail to
[EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company. All postings from
this list are the work of list subscribers and no warranty is made or implied as to
the accuracy of any information disseminated through this medium. By subscribing to
this list you agree to hold the list sponsor(s) blameless for any and all mishaps
which might occur due to your application of information received from this mailing
list.
To be removed from this list, send mail to [EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]