Replying to myself....erm, never mind...I must have a fairly old
raddb/radiusd.conf...I found this by googling:
db_dir = $(raddbdir) <<==
It should be:
db_dir = ${raddbdir} (brackets are wrong)
On Wed, 3 Jun 2009, u...@3.am wrote:
On Wed, 3 Jun 2009, Alan DeKok wrote:
Because you don't have the GDBM libraries or header files.
Ok, I installed those, and while I was at it, installed the latest radiusd.
The first error I got involved the "experimental"
raddb/sites-available/control-socket which was included in the old
radiusd.conf: $INCLUDE sites-enabled/. I moved the file and radiusd started
and worked as it did before.
However, when I uncomment my ippool statement, I now get this:
Module: Linked to module rlm_ippool
Module: Instantiating users_pool
ippool users_pool {
session-db = "$(raddbdir)/db.ippool"
ip-index = "$(raddbdir)/db.ipindex"
key = "%{NAS-IP-Address} %{NAS-Port}"
range-start = 172.16.1.2
range-stop = 172.16.1.253
netmask = 255.255.255.0
cache-size = 251
override = yes
maximum-timeout = 0
}
rlm_ippool: Failed to open file $(raddbdir)/db.ippool: No such file or
directory
/usr/etc/raddb/radiusd.conf[1824]: Instantiation failed for module
"users_pool"
/usr/etc/raddb/sites-enabled/default[337]: Failed to find module
"users_pool".
/usr/etc/raddb/sites-enabled/default[314]: Errors parsing accounting section.
Errors initializing modules
-----
If I understand correctly, if I am running radiusd as root, shouldn't it
simply create the db. files itself when started? I tried a "touch
raddb/db.ippool" but it changed nothing.
Again, thanks for your patience...
James Smallacombe PlantageNet, Inc. CEO and Janitor
u...@3.am http://3.am
=========================================================================
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
James Smallacombe PlantageNet, Inc. CEO and Janitor
u...@3.am http://3.am
=========================================================================
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
