Hi Luc,
good to know you are happy now. As I do not remember exactely what I
told you back then, would you be willing to do a final experiment? Just
remove all "config.cache" files from the tree before doing "configure"
(with the original configure script). And/or do a "make distclean"
before.
Could be a "sed" problem. Mine is newer (4.1.4), but we never had a
requirement on the sed-version.
Cheers
Martin
--- Luc Gauthier <[EMAIL PROTECTED]> wrote:
> Hi Martin,
>
> I finally had time to come back to my problem compiling ganglia on
> Irix...
>
> Thanks to your hint, I managed to have everything working ! If you
> remember, you suggested I should investigate those error messages I
> got
> when running the 'configure' script:
>
>
________________________________________________________________________
> Configuring expat ...
>
> configure: loading
> cache /home/master/shared/lgauthie/ganglia/ganglia-3.0.2/config.cache
> ./configure[1347]: syntax error at line 157 : `(' unexpected
>
> Configuring apr ...
>
> configure: loading
> cache /home/master/shared/lgauthie/ganglia/ganglia-3.0.2/config.cache
> ./configure[1398]: syntax error at line 157 : `(' unexpected
>
> Configuring libconfuse ...
>
> configure: loading
> cache /home/master/shared/lgauthie/ganglia/ganglia-3.0.2/config.cache
> ./configure[1428]: syntax error at line 157 : `(' unexpected
>
>
________________________________________________________________________
>
> Those error messages did not stop the 'configure' script from running
> but I had those strange error messages (hard links not adjusted to
> our
> directory architecture) when gmake'ing:
> gmake[3]: *** No rule to make target
> `/home/scratch/ganglia-cvs/ganglia-
> post-2_5_7/monitor-core/srclib/apr/build/apr_rules.mk'. Stop.
>
> So I decided to take a look at line 157 of the config.cache file that
> was giving the errors at configuration time and here it is:
> test "${lt_cv_sys_global_symbol_to_c_name_address+set}" = set ||
> lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^\'^: \([^
> \'^ ]*\) $/ {\"\1\", (lt_ptr) 0},/p'\'' -e '\''s/^\'^[BCDEGRST] \([^
> \'^ ]*\) \([^\'^ ]*\)$/ {"\2", (lt_ptr) \&\2},/p'\'
>
> Unfortunately, I must admit I am not advanced enough to rapidly see
> where is that unexpected '('. And since I did not have enough time to
> investigate it, I decided to refrain 'expat', 'apr' and 'libconfuse'
> from using the cache file at configuration time. To do so, I simply
> modified three lines in the 'configure' file (line number between
> square
> brackets):
>
>
________________________________________________________________________
> [2119] cd srclib/expat && ./configure --cache-file=
> $ganglia_popdir/config.cache
> became
> [2119] cd srclib/expat && ./configure
>
> [2123] cd srclib/apr && ./configure --cache-file=
> $ganglia_popdir/config.cache
> became
> [2123] cd srclib/apr && ./configure
>
> [2127] cd srclib/confuse && ./configure --cache-file=
> $ganglia_popdir/config.cache --disable-nls
> became
> [2127] cd srclib/confuse && ./configure --disable-nls
>
>
________________________________________________________________________
>
> So those three modules do the whole configuration step from scratch.
> Of
> course, it takes more time and this is not the best way to do the job
> but in the end, the gmake step goes all the way to the end and I get
> the
> binaries I've been waiting for ! :) Now that I have them, I can go on
> and try to set up ganglia on our network. I'll come back to the list
> if
> I have problems there.
>
> Thanks again for your help and if it can help, here is a summary of
> the
> tools I have on the machine I compiled ganglia on :
> - OS: IRIX 6.5.24m
> - sed: GNU sed version 4.0.7
> - test: test (GNU sh-utils) 2.0
> - automake: automake (GNU automake) 1.7.5
> - autoconf: autoconf (GNU Autoconf) 2.57
> - gmake: GNU Make 3.80
> - install: install (fileutils) 4.1
>
>
> Best regards,
> Luc Gauthier
>
>
>
>
>
>
> Le mercredi 25 janvier 2006 � 06:19 -0800, Martin Knoblauch a
�crit :
>
> > Hi Luc,
> >
> > yes, the "native" IRIX does not support "--version". Actually,
> using
> > "gmake" is the right thing to do.
> >
> > Your toolchain seems older than mine (automake-1.9.5,
> autoconf-2.59,
> > libtool-1.5.20), but newer than the recommended (1.6.3, 2.53,
> 1.4.2).
> > What is the version of "libtool"?
> >
> > In any case, what worries me are the syntax errors from configure.
> > Maybe you can check what they are about.
> >
> > > Configuring expat ...
> > >
> > > configure: loading cache
> > > /home/master/shared/ganglia_src/ganglia-3.0.2/config.cache
> > > ./configure[1347]: syntax error at line 157 : `(' unexpected
> > >
> > > Configuring apr ...
> > >
> > > configure: loading cache
> > > /home/master/shared/ganglia_src/ganglia-3.0.2/config.cache
> > > ./configure[1398]: syntax error at line 157 : `(' unexpected
> > >
> > > Configuring libconfuse ...
> > >
> > > configure: loading cache
> > > /home/master/shared/ganglia_src/ganglia-3.0.2/config.cache
> > > ./configure[1428]: syntax error at line 157 : `(' unexpected
> >
> > Also, could you reproduce a list of files with those wrong pathes
> > (after configure).
> >
> > And no, IRIX 6.5.24m vs. 6.5.27m should not make a difference.
> >
> > Thanks
> > Martin
> >
> > --- Luc Gauthier <[EMAIL PROTECTED]> wrote:
> >
> > > Hi Martin,
> > >
> > > Quite surprisingly, I was unable to determine the version of
> 'make'
> > > that
> > > is installed on the machine. There is indeed no option or way to
> get
> > > the
> > > version. So I guess we could describe it as "the version of make
> that
> > > comes with Irix 6.5.24m".
> > >
> >
> >
> > ------------------------------------------------------
> > Martin Knoblauch
> > email: k n o b i AT knobisoft DOT de
> > www: http://www.knobisoft.de
>
------------------------------------------------------
Martin Knoblauch
email: k n o b i AT knobisoft DOT de
www: http://www.knobisoft.de
