Am 2011-01-17 21:13, schrieb Alex Schuster: > Uh-oh. I suggest emerging badblocks, and then do a 'badblocks /dev/sdb' to > see which and how many blocks are defective. You can also replace sdb by > sdb6 or whatever partition you are specifically interested in. > You also might want to use the -n option (non-destructive write mode), but > only on partitions that are not mounted / used. > > smartmontools also offer some diagnostic features. Including a full surface > check, but it stops at the first error. At least you know then until which > sectory the drivs is still okay: > smartctl -tlong /dev/sdb > wait... > smartctl -l selftest /dev/sda > > smartctl -a /dev/sdb also shows lots of info, including the number of bad > and reallocated sectors. > > If cou can, make a copy of the partiton(s) drive with ddrescue (or dd- > rescue, don't know which one is better, but both are more tolerable to > errors than dd is). > > I had drives with single errors that seems to work fine for years after > this, but I do nto put important data on them. And it is also possible that > you had a head crash and more and more sectors become defective. So do the > backup fast, or do not use the drive until you do. Good luck!
Thanks, Alex ... I will use badblocks and smartctl in more detail after having the data off the drive (as mentioned in my reply to Mark's posting right now).