Hi Folks,
Is there an easy way to have specific WMS layers NOT be visible when published. It seems that all layers are switched on by default, hence slow to draw if you have a huge list of layers.
To clarify, I have various layers grouped using the "Default WMS Path" setting as follows but I only want certain layers to be switch on when the group is added to the table of contents in ArcMap (or any other client). So, if a user wanted to add all the Administration layers they could just add the Administration group with only the 250k layer visible by default and the other layers would be off to speed up load time. Obviously the user can switch the other layers on and off as required but this is just for a quick initial load.
Administration
1:25k map sheet index (Off)
1:50k map sheet index (Off)
1:100k map sheet index (Off)
1:250k map sheet index (On)
...
Geoscience
500k Bedrock (On)
500k Regolith (Off)
500k Linear Structures (On)
...
Is it as simple as a "visibility" tag in the SLD that I'm missing or is there another setting in Geoserver that will allow me to configure this?
Many thanks for help,
Tuyen
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Tuyen McDonald
Senior Spatial Analyst
Geoscience Information, Spatial Services
Geological Survey Division
DEPARTMENT OF MINES AND PETROLEUM
Postal Address: Box 7606, Cloisters Square, Perth, Western Australia 6850
Street Address: 100 Plain Street, East Perth, Western Australia 6004
Telephone: +61 8 9222 3749 Facsimile: +61 8 9222 3862
Email:[email protected]
Web:www.dmp.wa.gov.au
------------------------------------------------------------------------------ RSA(R) Conference 2012 Save $700 by Nov 18 Register now http://p.sf.net/sfu/rsa-sfdev2dev1
_______________________________________________ Geoserver-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/geoserver-users
