Bean wrote: > On Sun, Sep 27, 2009 at 9:00 PM, Stefan Bienert > <bien...@zbh.uni-hamburg.de> wrote: >> For me, the screen freezes, so graphics seem not to be cleared. >> >>> I could perhaps try the efi graphics driver on some iMacs later >>> this/next week (depending on the location where you are reading this). >> That would be nice. I use Bean's repository. > > Hi, > > Most likely it doesn't get the frame buffer address right, so screen > is written to somewhere else, this also consist with the fact you > don't see any console output until x starts. > > BTW, when you use the linux command, it should show some line about > detected video card info, can you paste it here. >
Ok, here is what I get after choosing the linux menu entry. Everything before the menu shows up, is to quick to read. OUTPUT-Start Rom image present. [Linux-bzimage, setup=0x2c00, size=0x2784a0] Video mode: 1280x800-32 Frame buffer base: 0x80010000 Video line length: 8192 OUTPUT-End I hope this is the requested info. Do provide other stuff, I probably need a detailed instruction. BTW, I cannot switch to terminal from X after starting with Grub2. greetings, Stefan _______________________________________________ Grub-devel mailing list Grub-devel@gnu.org http://lists.gnu.org/mailman/listinfo/grub-devel