Michal Suchanek wrote: > 2009/9/27 Stefan Bienert <bien...@zbh.uni-hamburg.de>: >> Bean wrote: >>> On Sun, Sep 27, 2009 at 9:00 PM, Stefan Bienert >>> <bien...@zbh.uni-hamburg.de> wrote: >>>> For me, the screen freezes, so graphics seem not to be cleared. >>>> >>>>> I could perhaps try the efi graphics driver on some iMacs later >>>>> this/next week (depending on the location where you are reading this). >>>> That would be nice. I use Bean's repository. >>> Hi, >>> >>> Most likely it doesn't get the frame buffer address right, so screen >>> is written to somewhere else, this also consist with the fact you >>> don't see any console output until x starts. >>> >>> BTW, when you use the linux command, it should show some line about >>> detected video card info, can you paste it here. >>> >> Ok, here is what I get after choosing the linux menu entry. Everything >> before the menu shows up, is to quick to read. >> >> OUTPUT-Start >> Rom image present. >> [Linux-bzimage, setup=0x2c00, size=0x2784a0] >> Video mode: 1280x800-32 >> Frame buffer base: 0x80010000 >> Video line length: 8192 >> OUTPUT-End >> >> I hope this is the requested info. Do provide other stuff, I probably >> need a detailed instruction. >> >> BTW, I cannot switch to terminal from X after starting with Grub2. > > Meaning that the keyboard combo does nothing or that switching to the > console does nothing? > > It should not do anything visible if the console is drawn in a wrong > place as suggested.
Screen switches to "nothing". So X switches to the console and then the screen stays black. greetings, Stefan _______________________________________________ Grub-devel mailing list Grub-devel@gnu.org http://lists.gnu.org/mailman/listinfo/grub-devel