Checked 22 meterband around 20.00 to 20.10 UT on Thursday May 12
on various remoted SDR's in Japan:

only 3 bcaster signal seen...

13840 kHz R NZ Pacific, in DRM mode broad digital block visible,
but only S=6 or -89dBm signal visible on Perseus screen at 20.03 UT.

13710even at 20.07 UT, MDG  and Arabic sce of MWV,
surprisingly S=9+15dB strength in Japan.

13760even at 20.10 UT, KRE  Voice of Korean from Kujang in French scheduled,
                      S=7-8 signal in Japan remotedly.
73 wb  df5sx


----- Original Message ----- From: "Glenn Hauser via groups.io" <wghauser=yahoo....@groups.io>
Sent: Thursday, May 12, 2022 5:44 PM
Subject: Re: [WOR] RNZ issues?

May be another of their maintenance periods disrupting schedule. At 0624 I
had big dead carrier on 13840, nothing on 11725. At 0705, 11725 on with
programming, 13840 off. Glenn

On Thursday, May 12, 2022, 09:41:22 AM GMT+1, Sam Sanchez
<pdxsanc...@gmail.com> wrote:

11725 not on @ scheduled start time of 0559, powers on at 0700, off at
scheduled 0758, but then transmitter powers on @ 0803 with news for 30
seconds, then off again. Powers on for 10 seconds with audio @ 0818, then
off. No 9700 monitored @ 0820, 0830, 0840.
Something rickety in Rangitaiki...at least for today. ;-)
Sam
Orygun

----- Original Message ----- From: Stephen Luce <stvluc...@sbcglobal.net>
Sent: Thursday, May 12, 2022 8:56 PM
Subject: Re: [WOR] RNZ issues?

Perhaps RNZ was using the Thomson transmitter from 1990 instead of the usual
2006 Thomson unit? The older transmitter, which is kept as a backup, has
been reported to be quite temperamental in its advanced age.

Stephen Luce
Houston, Texas
_
Hard-Core-DX mailing list
Hard-Core-DX@hard-core-dx.com
http://montreal.kotalampi.com/mailman/listinfo/hard-core-dx
http://www.hard-core-dx.com/
_______________________________________________

THE INFORMATION IN THIS ARTICLE IS FREE. It may be copied, distributed
and/or modified under the conditions set down in the Design Science License
published by Michael Stutz at
http://www.gnu.org/licenses/dsl.html

Reply via email to