I cant help with drivers or maintenance tool and I am assuming you were printing fine with a decent calibration before hand. I say that because 99% of issues on this line of printers we run into are printhead related. They go so long people forget to change them. Anything over 3-4 years is time to update to get back to fresh nozzles. Its less about whether they still work but how they are working at that point.
Profile wise, I would recommend a Color Munki for profiling. It will get rid of the cast unrelated to heads and provide what you want and then some as far as print quality. Way beyond the stock drivers. -- Peter Inshaw president Plotter Pros, Inc 1068 The Alameda Suite 100 San Jose, CA 95126 408.299.0680 x12 408.299.0676 fax 408.930.8040 mobile WEB STORE IS ALIVE!! Check it out @ http://www.PlotterPros.com ------------------------------------ Website: http://groups.yahoo.com/group/HPDesignJet_Printers Post message: HPDesignJet_Printers@yahoogroups.com Subscribe: hpdesignjet_printers-subscr...@yahoogroups.com Unsubscribe: hpdesignjet_printers-unsubscr...@yahoogroups.com List owner: hpdesignjet_printers-ow...@yahoogroups.com Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/HPDesignJet_Printers/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/HPDesignJet_Printers/join (Yahoo! ID required) <*> To change settings via email: hpdesignjet_printers-dig...@yahoogroups.com hpdesignjet_printers-fullfeatu...@yahoogroups.com <*> To unsubscribe from this group, send an email to: hpdesignjet_printers-unsubscr...@yahoogroups.com <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
