This is a snippit from my Xorg.0.log file: (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 10de,00e1 card 1695,100c rev a1 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 10de,00e0 card 1695,100c rev a2 class 06,01,00 hdr 80 (II) PCI: 00:01:1: chip 10de,00e4 card 1695,100c rev a1 class 0c,05,00 hdr 80 (II) PCI: 00:02:0: chip 10de,00e7 card 1695,100c rev a1 class 0c,03,10 hdr 80 (II) PCI: 00:02:1: chip 10de,00e7 card 1695,100c rev a1 class 0c,03,10 hdr 80 (II) PCI: 00:02:2: chip 10de,00e8 card 1695,100c rev a2 class 0c,03,20 hdr 80 (II) PCI: 00:05:0: chip 10de,00df card 1695,100c rev a2 class 06,80,00 hdr 00 (II) PCI: 00:06:0: chip 10de,00ea card 1695,100b rev a1 class 04,01,00 hdr 00 (II) PCI: 00:08:0: chip 10de,00e5 card 1695,100c rev a2 class 01,01,8a hdr 00 (II) PCI: 00:0a:0: chip 10de,00e3 card 1695,100c rev a2 class 01,01,85 hdr 00 (II) PCI: 00:0b:0: chip 10de,00e2 card 0000,0000 rev a2 class 06,04,00 hdr 01 (II) PCI: 00:0e:0: chip 10de,00ed card 0000,0000 rev a2 class 06,04,00 hdr 01 (II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 01:00:0: chip 10de,0171 card 0000,0000 rev a3 class 03,00,00 hdr 00 (II) PCI: 02:06:0: chip 1106,3043 card 1186,1400 rev 06 class 02,00,00 hdr 00 (II) PCI: 02:0a:0: chip 4444,0803 card 0070,4000 rev 01 class 04,00,00 hdr 00 (II) PCI: End of PCI scan
lspci gives: 0000:02:0a.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01) So the BusID for my card should be 02:0a:0 Before, my BusID was "0x02:0x0a:0x00" and that worked fine. Now I set it to 2:0a:0 but I get this error: (WW) ivtvdev: No matching Device section for instance (BusID PCI:2:10:0) found (EE) No devices detected. Any idea? N. On Sun, 19 Dec 2004 16:28:33 -0000, John Harvey <[EMAIL PROTECTED]> wrote: > Change > BusID "0:0x08:0" > > To > BusID "0:08:0" > > It has > Bus id's are decimal and should only contain digits and colons in the id > part. > The x in the Busid causes the parser to error. > > John ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/ _______________________________________________ ivtv-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
