0.3.3e works great for me...   two 150's non mce, warm or cold boot, rmmod && modprobe no problems all around (remote also works: using lirc-0.7.1pre2 with minor changes to make /dev/lirc0 instead of /dev/lirc/0... just fyi).  Thanks for all your coordination and efforts Chris.

tveeprom: Hauppauge: model = 26052, rev = C182, serial# = 2902653
tveeprom: tuner = LG TAPC H791F (idx = 82, type = 39)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3410D (type = 5)
ivtv: i2c attach [client=tveeprom[50],ok]
tveeprom: Hauppauge: model = 26052, rev = C182, serial# = 7481461
tveeprom: tuner = LG TAPC H791F (idx = 82, type = 39)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3410D (type = 5)
ivtv: i2c attach [client=tveeprom[50],ok]


showdog root # cat /etc/modules.d/ivtv
alias char-major-81 videodev
alias char-major-81-0 ivtv
alias char-major-61 lirc_i2c
options ivtv tuner=39,39 ivtv_std=1,1 tda9887=0
options wm8775 debug=0
options cx25840 debug=0
add above ivtv lirc_dev lirc_i2c


ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.3 (e) loading
ivtv: Linux version: 2.6.10-gentoo-r6 PENTIUM4 gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI interrupt 0000:06:01.0[A] -> GSI 3 (level, low) -> IRQ 3
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: XXX PCI device: 0x2580 vendor: 0x8086
tveeprom: Hauppauge: model = 26052, rev = C182, serial# = 2902653
tveeprom: tuner = LG TAPC H791F (idx = 82, type = 39)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3410D (type = 5)
ivtv: i2c attach [client=tveeprom[50],ok]
ivtv: Tuner Type 39, Tuner formats 0x00001000, Radio: yes, Model 0x008d1612, Revision 0x00000000
ivtv: Radio detected
tuner: Ignoring new-style parameters in presence of obsolete ones
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 13883 loaded.
cx25840: FW image md5 digest: a6f6a90a3be338cdb89d59e835798408
cx25840: FW image sha1 digest: ad2872fb98ad43b6c4afa45d239a57010edebe84
ivtv: i2c attach [client=cx25840[50],ok]
ivtv: i2c attach [client=wm8775[50],ok]
ivtv: Encoder revision: 0x02050032
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 0 using 1024 16384 byte buffers  0 kbytes total
ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers  16777216 kbytes total
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create DMA stream 1
ivtv: Allocate DMA stream 1
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 2 using 40 52224 byte buffers  0 kbytes total
ivtv: Allocate DMA stream 2 using 40 52224 byte buffers  2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create DMA stream 3 using 455 4608 byte buffers  0 kbytes total
ivtv: Allocate DMA stream 3 using 455 4608 byte buffers  2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Create stream 4
ivtv: Allocate stream 4
ivtv: Setting Tuner 39
tuner: type set to 39 (LG NTSC (newer TAPC series)) by ivtv i2c driver #0
ivtv: Switching standard to NTSC.
ivtv: i2c client addr: 0x43 not found!
ivtv: Initialized WinTV PVR 150, card #0
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ivtv: ivtv_enc_thread: pid = 5585, itv = 0xe09dd0a0
ACPI: PCI interrupt 0000:06:02.0[A] -> GSI 5 (level, low) -> IRQ 5
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: XXX PCI device: 0x2580 vendor: 0x8086
tveeprom: Hauppauge: model = 26052, rev = C182, serial# = 7481461
tveeprom: tuner = LG TAPC H791F (idx = 82, type = 39)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3410D (type = 5)
ivtv: i2c attach [client=tveeprom[50],ok]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1
ivtv: i2c attach [client=(tuner unset),ok]
cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 13883 loaded.
cx25840: FW image md5 digest: a6f6a90a3be338cdb89d59e835798408
cx25840: FW image sha1 digest: ad2872fb98ad43b6c4afa45d239a57010edebe84
ivtv: i2c attach [client=cx25840[50],ok]
ivtv: i2c attach [client=wm8775[50],ok]
ivtv: Tuner Type 39, Tuner formats 0x00001000, Radio: yes, Model 0x008d1612, Revision 0x00000000
ivtv: Radio detected
ivtv: Encoder revision: 0x02050032
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Registered v4l2 device, streamtype 0 minor 1
ivtv: Create DMA stream 0 using 1024 16384 byte buffers  0 kbytes total
ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers  16777216 kbytes total
ivtv: Registered v4l2 device, streamtype 1 minor 33
ivtv: Create DMA stream 1
ivtv: Allocate DMA stream 1
ivtv: Registered v4l2 device, streamtype 2 minor 225
ivtv: Create DMA stream 2 using 40 52224 byte buffers  0 kbytes total
ivtv: Allocate DMA stream 2 using 40 52224 byte buffers  2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 25
ivtv: Create DMA stream 3 using 455 4608 byte buffers  0 kbytes total
ivtv: Allocate DMA stream 3 using 455 4608 byte buffers  2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 4 minor 65
ivtv: Create stream 4
ivtv: Allocate stream 4
ivtv: Setting Tuner 39
tuner: type set to 39 (LG NTSC (newer TAPC series)) by ivtv i2c driver #1
ivtv: Switching standard to NTSC.
ivtv: i2c client addr: 0x43 not found!
ivtv: Initialized WinTV PVR 150, card #1
ivtv: ====================  END INIT IVTV  ====================

--
-Brett

http:saltybeagle.com aim:ianswerq

Reply via email to