try adding tda9887=0 to your ivtv module options
N.
On 4/20/05, Andreas Angerer <[EMAIL PROTECTED]> wrote:
> Hi @ ivtv-devel,
>
> I had mythtv and ivtv working for quite some time on my PVR 250, 2.6.8
> kernel and 0.2.0 (rc3i) on Fedora Core 2. No complaints. I installed a
> tuner type 38 PVR 350 recently and have been trying to get them both
> running in the same machine. I have no Problems watching TV and changing
> channels on the PVR 250, but the PVR 350 won't work with the tuner, the
> Composite Input seems to work (the Picture gets black when i change the
> input with ptune-ui)
> I also tried to move the cards through various PCI slots, tried to set
> tuner direct via options in modprobe.conf, no change.
>
> Have i missed something?
>
> Regards
> Andreas
>
> Here's /etc/modprobe.conf:
> alias char-major-61 lirc_i2c
> alias eth0 sis900
> alias usb-controller ehci-hcd
> alias usb-controller1 ohci-hcd
> install snd-intel8x0 /sbin/modprobe --ignore-install snd-intel8x0 &&
> /usr/sbin/alsactl restore >/dev/null 2>&1 || :
> remove snd-intel8x0 { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; };
> /sbin/modprobe -r --ignore-remove snd-intel8x0
> alias snd-card-0 snd-intel8x0
> # ivtv kernel modules
> alias char-major-81 videodev
> alias char-major-81-0 ivtv
> alias char-major-81-1 ivtv
> alias msp3400 msp3400-ivtv
> install lirc_i2c /sbin/modprobe ivtv; /sbin/modprobe --ignore-install
> lirc_i2c
> # nvidia kernel module
> alias char-major-195 nvidia-1_0-7174
> alias nvidia nvidia-1_0-7174
>
> IVTV Output:
> ivtv: ==================== START INIT IVTV ====================
> ivtv: version 0.2.0 (rc3i) loading
> ivtv: Linux version: 2.6.10-1.771_FC2 686 REGPARM 4KSTACKS gcc-3.3
> ivtv: In case of problems please include the debug info
> ivtv: between the START INIT IVTV and END INIT IVTV lines when
> ivtv: mailing the ivtv-devel mailinglist.
> ivtv: Autodetected WinTV PVR 350 card
> ivtv: Found an iTVC15 based chip
> ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
> PCI: setting IRQ 11 as level-triggered
> ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 11 (level, low) -> IRQ 11
> ivtv: XXX PCI device: 0x0661 vendor: 0x1039
> ivtv: i2c attach [client=tveeprom,ok]
> tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 7671464
> tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38)
> tveeprom: tuner fmt = PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
> tveeprom: audio_processor = CS5331 (type = 9)
> ivtv: Tuner Type 38, Tuner formats 0x00400e17, Radio: yes, Model
> 0x00ad2557, Revision 0xe0a85304
> ivtv: Radio detected
> ivtv: i2c attach [client=(tuner unset),ok]
> tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
> saa7115: detecting saa7115 client on address 0x42
> saa7115: writing init values
> ivtv: i2c attach [client=saa7115[0],ok]
> saa7115: status: (1E) 0x40, (1F) 0xc0
> saa7127: Ignoring new-style parameters in presence of obsolete ones
> saa7127: video encoder driver version V 0.3 loaded
> saa7127: detecting saa7127 client on address 0x88
> saa7127: Selecting NTSC video Standard
> saa7127: Selecting S-Video+Composite
> saa7127: Turn WSS off
> saa7127: Widescreen Mode 4:3 Full Format
> saa7127: Selecting Normal Encoder Input
> saa7127: Enable Video Output
> ivtv: i2c attach [client=saa7127[0],ok]
> msp34xx: ivtv version
> msp34xx: init: chip=MSP3418W-B3, has NICAM support, simple (D) mode,
> simpler (G) no-thread mode
> msp34xx: $Id$ compiled on: Apr 3 2005 19:27:44
> ivtv: i2c attach [client=MSP3418W-B3,ok]
> bttv: driver version 0.9.15 loaded
> bttv: snapshot date 2005-03-10
> bttv: using 8 buffers with 2080k (520 pages) each for capture
> ivtv: Encoder revision: 0x02040024
> ivtv: Encoder Firmware may be buggy, use version 0x02040011
> ivtv: Decoder revision: 0x02020023
> ivtv: Configuring WinTV PVR 350 card with 9 streams
> ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes
> total
> ivtv: Registered v4l2 device, streamtype 0 minor 0
> ivtv: Create DMA stream 1
> ivtv: Registered v4l2 device, streamtype 1 minor 32
> ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total
> ivtv: Registered v4l2 device, streamtype 2 minor 224
> ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total
> ivtv: Registered v4l2 device, streamtype 3 minor 24
> ivtv: Create stream 4
> ivtv: Registered v4l2 device, streamtype 4 minor 64
> ivtv: Create DMA stream 5 using 16 65536 byte buffers 1048576 kbytes total
> ivtv: Registered v4l2 device, streamtype 5 minor 16
> ivtv: Create stream 6 using 1024 2048 byte buffers 262144 kbytes total
> ivtv: Registered v4l2 device, streamtype 6 minor 228
> ivtv: Create stream 7
> ivtv: Registered v4l2 device, streamtype 7 minor 232
> ivtv: Create DMA stream 8
> ivtv: Registered v4l2 device, streamtype 8 minor 48
> ivtv: Setting Tuner 38
> tuner 0-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
> saa7115: decoder set input (4)
> saa7115: now setting Composite input
> ivtv: Setting audio matrix to input 3, output 1
> ivtv: Switching standard to PAL.
> ivtv: ivtv_enc_thread: pid = 2709, itv = 0xe0a7a120
> ivtv: ivtv_dec_thread: pid = 2710, itv = 0xe0a7a120
> saa7115: decoder set norm PAL
> saa7115: set audio: 0x01
> saa7127: Setting Encoder Video Standard
> saa7127: Set PAL Video Mode
> saa7127: Selecting PAL video Standard
> ivtv: Initialized WinTV PVR 350, card #0
> ivtv: Autodetected WinTV PVR 250 card
> ivtv: Found an iTVC16 based chip
> ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
> ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 5 (level, low) -> IRQ 5
> ivtv: XXX PCI device: 0x0661 vendor: 0x1039
> ivtv: i2c attach [client=tveeprom,ok]
> ivtv: i2c attach [client=(tuner unset),ok]
> tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #1)
> saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005)
> saa7115: detecting saa7115 client on address 0x42
> saa7115: writing init values
> ivtv: i2c attach [client=saa7115[1],ok]
> saa7115: status: (1E) 0x48, (1F) 0xc0
> msp34xx: ivtv version
> msp34xx: init: chip=MSP3418W-A2, has NICAM support, simple (D) mode,
> simpler (G) no-thread mode
> msp34xx: $Id$ compiled on: Apr 3 2005 19:27:44
> ivtv: i2c attach [client=MSP3418W-A2,ok]
> tveeprom: Hauppauge: model = 32054, rev = B148, serial# = 2766638
> tveeprom: tuner = LG TP18PSB11D (idx = 48, type = 29)
> tveeprom: tuner fmt = PAL(B/G) (eeprom = 0x04, v4l2 = 0x00000007)
> tveeprom: audio_processor = CS5331 (type = 9)
> ivtv: Tuner Type 29, Tuner formats 0x00000007, Radio: yes, Model
> 0x00891518, Revision 0xe0a997a4
> ivtv: Radio detected
> ivtv: Encoder revision: 0x02040024
> ivtv: Encoder Firmware may be buggy, use version 0x02040011
> ivtv: Configuring WinTV PVR 250 card with 5 streams
> ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes
> total
> ivtv: Registered v4l2 device, streamtype 0 minor 1
> ivtv: Create DMA stream 1
> ivtv: Registered v4l2 device, streamtype 1 minor 33
> ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total
> ivtv: Registered v4l2 device, streamtype 2 minor 225
> ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total
> ivtv: Registered v4l2 device, streamtype 3 minor 25
> ivtv: Create stream 4
> ivtv: Registered v4l2 device, streamtype 4 minor 65
> ivtv: Setting Tuner 29
> tuner 1-0061: type set to 29 (LG PAL_BG (TPI8PSB11D))
> saa7115: decoder set input (4)
> saa7115: now setting Composite input
> ivtv: Setting audio matrix to input 3, output 1
> ivtv: Switching standard to PAL.
> ivtv: ivtv_enc_thread: pid = 2761, itv = 0xe0a8e5c0
> saa7115: decoder set norm PAL
> saa7115: set audio: 0x01
> ivtv: Initialized WinTV PVR 250, card #1
> ivtv: ==================== END INIT IVTV ====================
>
> -------------------------------------------------------
> This SF.Net email is sponsored by: New Crystal Reports XI.
> Version 11 adds new functionality designed to reduce time involved in
> creating, integrating, and deploying reporting solutions. Free runtime info,
> new features, or free trial, at: http://www.businessobjects.com/devxi/728
> _______________________________________________
> ivtv-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/ivtv-devel
>
-------------------------------------------------------
This SF.Net email is sponsored by: New Crystal Reports XI.
Version 11 adds new functionality designed to reduce time involved in
creating, integrating, and deploying reporting solutions. Free runtime info,
new features, or free trial, at: http://www.businessobjects.com/devxi/728
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
