I tried Kernel 2.6.13-rc4 + ivtv 0.2.0-rc3k and also 2.6.12.2 + ivtv 0.3.6z. The Video-input works, but only snow on tuner. But the tuner is recognized correctly as type 29.
Aug 1 20:17:44 linvdr user.info kernel: Linux video capture interface: v1.00 Aug 1 20:17:44 linvdr user.info kernel: bttv: driver version 0.9.15 loaded Aug 1 20:17:44 linvdr user.info kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture Aug 1 20:17:45 linvdr user.warn kernel: ivtv: ==================== START INIT IVTV ==================== Aug 1 20:17:45 linvdr user.info kernel: ivtv: version 0.3.6 (z) loading Aug 1 20:17:45 linvdr user.warn kernel: ivtv: Linux version: 2.6.12.2 586 gcc-3.4 Aug 1 20:17:45 linvdr user.warn kernel: ivtv: In case of problems please include the debug info Aug 1 20:17:45 linvdr user.warn kernel: ivtv: between the START INIT IVTV and END INIT IVTV lines when Aug 1 20:17:45 linvdr user.warn kernel: ivtv: mailing the ivtv-devel mailinglist. Aug 1 20:17:45 linvdr user.info kernel: ivtv: Autodetected WinTV PVR 250 card Aug 1 20:17:45 linvdr user.info kernel: ivtv: Found an iTVC16 based chip Aug 1 20:17:45 linvdr user.warn kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 Aug 1 20:17:45 linvdr user.warn kernel: PCI: setting IRQ 10 as level-triggered Aug 1 20:17:45 linvdr user.info kernel: ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 Aug 1 20:17:45 linvdr user.info kernel: ivtv: Unreasonably low latency timer, setting to 64 (was 32) Aug 1 20:17:45 linvdr user.info kernel: ivtv: VIA PCI device: 0x0601 vendor: 0x1106 Aug 1 20:17:45 linvdr user.info kernel: tveeprom: Hauppauge: model = 32034, rev = B248, serial# = 6159413 Aug 1 20:17:45 linvdr user.info kernel: tveeprom: tuner = LG TP18PSB11D (idx = 48, type = 29) Aug 1 20:17:45 linvdr user.info kernel: tveeprom: tuner fmt = PAL(B/G) (eeprom = 0x04, v4l2 = 0x00000007) Aug 1 20:17:45 linvdr user.info kernel: tveeprom: audio_processor = MSP3415 (type = 6) Aug 1 20:17:45 linvdr user.warn kernel: ivtv: i2c attach [client=tveeprom[50],ok] Aug 1 20:17:45 linvdr user.warn kernel: ivtv: Tuner Type 29, Tuner formats 0x00000007, Radio: yes, Model 0x00892518, Revision 0x00000000 Aug 1 20:17:45 linvdr user.warn kernel: ivtv: PAL tuner detected Aug 1 20:17:45 linvdr user.warn kernel: ivtv: Radio detected Aug 1 20:17:45 linvdr user.warn kernel: tuner: Ignoring new-style parameters in presence of obsolete ones Aug 1 20:17:45 linvdr user.info kernel: saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) Aug 1 20:17:45 linvdr user.info kernel: saa7115: detecting saa7115 client on address 0x42 Aug 1 20:17:45 linvdr user.info kernel: saa7115: writing init values Aug 1 20:17:45 linvdr user.warn kernel: ivtv: i2c attach [client=saa7115[50],ok] Aug 1 20:17:45 linvdr user.info kernel: saa7115: status: (1E) 0x48, (1F) 0xc0 Aug 1 20:17:47 linvdr user.warn kernel: ivtv: Encoder revision: 0x02040024 Aug 1 20:17:47 linvdr user.warn kernel: ivtv: Encoder Firmware may be buggy, use version 0x02040011 Aug 1 20:17:47 linvdr user.info kernel: ivtv: Configuring WinTV PVR 250 card with 5 streams Aug 1 20:17:47 linvdr user.info kernel: ivtv: Registered v4l2 device for encoder MPEG minor 0 Aug 1 20:17:47 linvdr user.info kernel: ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) Aug 1 20:17:47 linvdr user.info kernel: ivtv: Registered v4l2 device for encoder YUV minor 32 Aug 1 20:17:47 linvdr user.info kernel: ivtv: Create DMA encoder YUV stream: 0 x 12960 buffers (0KB total) Aug 1 20:17:47 linvdr user.info kernel: ivtv: Registered v4l2 device for encoder VBI minor 224 Aug 1 20:17:47 linvdr user.info kernel: ivtv: Create DMA encoder VBI stream: 0 x 12740 buffers (0KB total) Aug 1 20:17:47 linvdr user.info kernel: ivtv: Registered v4l2 device for encoder PCM audio minor 24 Aug 1 20:17:47 linvdr user.info kernel: ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) Aug 1 20:17:47 linvdr user.info kernel: ivtv: Registered v4l2 device for encoder radio minor 64 Aug 1 20:17:47 linvdr user.info kernel: ivtv: Create encoder radio stream Aug 1 20:17:47 linvdr user.info kernel: ivtv: Setting Tuner 29 Aug 1 20:17:47 linvdr user.warn kernel: ivtv: i2c client id: 0x02 not found! Aug 1 20:17:47 linvdr user.info kernel: saa7115: decoder set norm PAL Aug 1 20:17:47 linvdr user.info kernel: saa7115: set audio: 0x01 Aug 1 20:17:47 linvdr user.info kernel: saa7115: decoder set input (4) Aug 1 20:17:47 linvdr user.info kernel: saa7115: now setting Composite input Aug 1 20:17:47 linvdr user.warn kernel: ivtv: Setting audio matrix to input 3, output 1 Aug 1 20:17:47 linvdr user.warn kernel: ivtv: i2c client addr: 0x40 not found for command 0x40086d11! Aug 1 20:17:47 linvdr user.warn kernel: ivtv: i2c client addr: 0x40 not found for command 0x80287610! Aug 1 20:17:47 linvdr user.warn kernel: ivtv: i2c client addr: 0x40 not found for command 0x40287611! Aug 1 20:17:47 linvdr user.warn kernel: ivtv: Switching standard to PAL. Aug 1 20:17:47 linvdr user.warn kernel: ivtv: i2c client id: 0x02 not found! Aug 1 20:17:47 linvdr user.warn kernel: ivtv: i2c client addr: 0x40 not found for command 0x40307603! Aug 1 20:17:47 linvdr user.info kernel: saa7115: decoder set norm PAL Aug 1 20:17:47 linvdr user.info kernel: saa7115: set audio: 0x01 Aug 1 20:17:47 linvdr user.info kernel: ivtv: Initialized WinTV PVR 250, card #0 Aug 1 20:17:47 linvdr user.warn kernel: ivtv: ==================== END INIT IVTV ==================== Aug 1 20:17:47 linvdr user.warn kernel: ivtv: ivtv_enc_thread: pid = 2310, itv = 0xd0b28a20 Aug 1 20:17:47 linvdr user.warn kernel: ivtv: ivtv_enc_vbi_thread: pid = 2311, itv = 0xd0b28a20 Aug 1 20:17:47 linvdr user.warn kernel: lirc_i2c: chip found @ 0x18 (Hauppauge IR) Aug 1 20:17:47 linvdr user.warn kernel: ivtv: i2c attach [client=Hauppauge IR,ok] Seems to be a problem with tveeprom, lsmod shows that it is not used by ivtv. Module Size Used by lirc_serial 13408 0 evdev 9472 0 8139too 23680 0 mii 5632 1 8139too em8300 62004 8 adv717x 6420 0 msp3400 26416 0 saa7115 11404 0 tuner 19484 0 ivtv 1332164 4 bttv 149648 0 video_buf 20868 1 bttv i2c_algo_bit 9224 3 em8300,ivtv,bttv v4l2_common 5888 1 bttv btcx_risc 5000 1 bttv tveeprom 12972 1 bttv videodev 9472 4 ivtv,bttv lirc_i2c 9220 1 lirc_dev 14180 2 lirc_serial,lirc_i2c i2c_dev 9600 0 i2c_core 20496 9 adv717x,msp3400,saa7115,tuner,bttv,i2c_algo_bit,tveeprom,lirc_i2c,i2c_dev ehci_hcd 30984 0 uhci_hcd 30352 0 ohci_hcd 20356 0 cdfs 27432 0 (I have no idea why bttv is loaded!) It always worked with a simple "modprobe ivtv" with older versions/kernels. Is there something wrong with the latest i2c-patches ? Greetings, Martin ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
