Re: [ivtv-devel] Problems with PVR-350

[Curtis Wood]

Hi Allan, 2 things I noticed in your output... 1) ivtv: i2c client addr: 0x50 not found! I tried 4 different driver sets untill I got my 150 working, in all but the 4th (and working) driver, I would get the 12c errors... I'm using the 0.3.7b CVS driver... 2) ivtv: Encoder mailbox not found ivtv: Decoder mailbox not found ivtv: Error locating firmware. You need to make sure the HcwMakoA.ROM, ivtv-fw-dec.bin and ivtv-fw-enc.bin are in /lib/modules - the ROM is in on your CDROM that came with your card, and the bin files are extracted from the windows .exe driver, using a perl script (ivtvfwextract.pl).. Also make sure that your distro doesnt have any of the bttv drivers that will conflict with the ivtv drivers (IE: tuner), this hozed up my install a bunch of times... Curtis On Friday 05 August 2005 04:45 am, Allan Joergensen wrote: > Hi, > > I have tried getting my new PVR-350 to work with both Ubuntu and Fedora > to no avail. > > ivtv: no version for "struct_module" found: kernel tainted. > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.2.0 (rc3j) loading > ivtv: Linux version: 2.6.12-1.1398_FC4 686 REGPARM 4KSTACKS gcc-4.0 > ivtv: In case of problems please include the debug info > ivtv: between the START INIT IVTV and END INIT IVTV lines when > ivtv: mailing the ivtv-devel mailinglist. > ivtv: Autodetected WinTV PVR 350 card > ivtv: Found an iTVC15 based chip > ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 > PCI: setting IRQ 11 as level-triggered > ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [LNKC] -> GSI 11 (level, > low) -> IRQ 11 > ivtv: XXX PCI device: 0x7120 vendor: 0x8086 > ivtv: i2c client addr: 0x50 not found! > ivtv: Error -19 reading Hauppauge eeprom. > ivtv: Possible causes: the tveeprom module was not loaded, or > ivtv: the eeprom kernel module was loaded before the tveeprom module. > saa7115: starting probe for adapter SMBus I801 adapter at 1400 (0x0) > saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) > saa7127: Ignoring new-style parameters in presence of obsolete ones > saa7127: video encoder driver version V 0.3 loaded > ivtv: Encoder mailbox not found > ivtv: Decoder mailbox not found > ivtv: Error locating firmware. > ivtv: Error -12 on initialization > ivtv-iTVC15_16_mpg2_encoder_card: probe of 0000:01:09.0 failed with > error -12 > ivtv: ==================== END INIT IVTV ==================== > > 01:09.0 Multimedia video controller: Internext Compression Inc iTVC15 > MPEG-2 Encoder (rev 01) > Subsystem: Hauppauge computer works Inc. WinTV PVR-350 > Flags: bus master, medium devsel, latency 64, IRQ 11 > Memory at f8000000 (32-bit, prefetchable) [size=64M] > Capabilities: [44] Power Management version 2 > > With Ubuntu I compiled the drivers by hand (both the latest 0.2 and 0.3 > drivers) and I followed the Myth(TV)ology HOWTO when trying my luck with > Fedora. The error message is the same with all of them. I've also tried > using the firmware from the CD.