Hello all.
I'm running FC3 and ivtv with a PVR-350 and I'm having log file problems.
My /var/log/messages file fills up with the messages below while using
MythTV (for the most part, only when I'm displaying a live preview of my
recordings while selecting them from a list). I can minimize the affect by
de-selecting "Setup->Setup->TV Settings->Playback->Display live preview of
recordings". Because of the error messages, however, I'm thinking that I
have ivtv setup incorrectly.
I've also noticed that I do not get these messages if my X display isn't
sent through the PVR-350's TV Out.
Anyone see anything obvious?
I know at least one other person has this problem. Anyone else?
TIA
-Tim
*** sample of /var/log/messages ( this is repeated over and over ) Jul 31
08:57:24 localhost kernel: ivtv-osd: OSD: REG_DECSG1LEN wait failed Jul 31
08:57:24 localhost kernel: ivtv: DMA Registers State: xfer:
0x00000001, state: 0x00000002 dec_addr: 0x1edf45b8 enc_addr: 0x1f1e0060
control: 0x00000003
Jul 31 08:57:24 localhost kernel: ivtv: DMA DEC Buffers:
Jul 31 08:57:24 localhost kernel: 0x10fd8000:0x015ac8c0:0x00001000 Jul 31
08:57:24 localhost kernel: ivtv: DMA ENC Buffers:
Jul 31 08:57:24 localhost kernel: 0x000faadc:0x1ece8000:0x80004000 Jul 31
08:57:24 localhost kernel: 0x000ebadc:0x1ecd0000:0x80004000 Jul 31 08:57:24
localhost kernel: 0x00108adc:0x1edd0000:0x80004000 Jul 31 08:57:24
localhost kernel: 0x000e7b1c:0x1f228000:0x00004000 Jul 31 08:57:24
localhost kernel: 0x000ebb1c:0x1f22c000:0x80004000 Jul 31 08:57:24
localhost kernel: 0x000efb1c:0x1ecf0000:0x80004000 Jul 31 08:57:24
localhost kernel: 0x9ea45641:0x91b4ff8f:0xdd4cfeff Jul 31 08:57:24
localhost kernel: 0x14768635:0x4725f832:0x9ced731b
******************************************************
*** snippet from xorg.conf ***
Section "Device"
Identifier "Hauppauge PVR 350 iTVC15 Framebuffer"
Driver "ivtvdev"
Option "fbdev" "/dev/fb1"
Option "ivtv" "/dev/fb1"
BusID "PCI:0:13:0" # lspci says 00:08.0 EndSection
******************************************************
** rpm list **
# rpm -qa | grep ivtv
ivtv-firmware-1.8a-4.at
ivtvdev-0.10-2.rhfc3.at
ivtv-firmware-enc-2.04.024-4.at
ivtv-firmware-dec-2.02.023-4.at
perl-Video-ivtv-0.13-7.rhfc3.at
ivtv-0.2.0-69_rc3k.rhfc3.at
ivtv-kmdl-2.6.12-1.1372_FC3-0.2.0-69_rc3k.rhfc3.at
******************************************************
** modprobe.conf **
alias eth0 sk98lin
alias scsi_hostadapter sata_via
alias snd-card-0 snd-via82xx
options snd-card-0 index=0
install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx &&
/usr/sbin/alsactl restore >/dev/null 2>&1 || :
remove snd-via82xx { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; };
/sbin/modprobe -r --ignore-remove snd-via82xx alias usb-controller ehci-hcd
alias usb-controller1 uhci-hcd alias ieee1394-controller ohci1394 alias
char-major-61 lirc_i2c
# ivtv modules setup
alias char-major-81 videodev
alias char-major-81-0 ivtv
alias msp3400 msp3400-ivtv
alias tveeprom tveeprom-ivtv
options ivtv ivtv_debug=0
install ivtv /sbin/modprobe --ignore-install ivtv; /sbin/modprobe ivtv-fb
install lirc_i2c /sbin/modprobe ivtv; /sbin/modprobe --ignore-install
lirc_i2c
******************************************************
**dmesg output**
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.2.0 (rc3j) loading
ivtv: Linux version: 2.6.12-1.1372_FC3 gcc-3.4
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 350 card
ivtv: Found an iTVC15 based chip
ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 18 (level, low) -> IRQ 177
ivtv: VIA PCI device: 0x3188 vendor: 0x1106
tveeprom: Hauppauge: model = 48132, rev = K268, serial# = 2914203
tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3440 (type = 11)
ivtv: i2c attach [client=tveeprom,ok]
msp34xx: ivtv version
msp34xx: init: chip=MSP3448W-A2, has NICAM support, simple (D) mode, simpler
(G) no-thread mode
msp34xx: $Id$ compiled on: Jul 16 2005 11:57:32
ivtv: i2c attach [client=MSP3448W-A2,ok]
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115,ok]
saa7115: status: (1E) 0x00, (1F) 0xc0
ivtv: i2c attach [client=(tuner unset),ok] tuner 0-0061: chip found @ 0xc2
(ivtv i2c driver #0)
saa7127: detecting saa7127 client on address 0x88
saa7127: Selecting NTSC video Standard
saa7127: Selecting S-Video+Composite
saa7127: Turn WSS off
saa7127: Widescreen Mode 4:3 Full Format
saa7127: Selecting Normal Encoder Input
saa7127: Enable Video Output
ivtv: i2c attach [client=saa7127,ok]
ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model 0x00ad2598,
Revision 0x00000001
ivtv: NTSC tuner detected
ivtv: Radio detected
ivtv: Encoder revision: 0x02040024
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring WinTV PVR 350 card with 9 streams
ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 1
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create stream 4
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Create DMA stream 5 using 16 65536 byte buffers 1048576 kbytes total
ivtv: Registered v4l2 device, streamtype 5 minor 16
ivtv: Create stream 6 using 1024 2048 byte buffers 262144 kbytes total
ivtv: Registered v4l2 device, streamtype 6 minor 228
ivtv: Create stream 7
ivtv: Registered v4l2 device, streamtype 7 minor 232
ivtv: Create DMA stream 8
ivtv: Registered v4l2 device, streamtype 8 minor 48
ivtv: Setting Tuner 47
tuner 0-0061: type set to 47 (LG NTSC (TAPE series))
saa7115: decoder set input (4)
saa7115: now setting Composite input
ivtv: ivtv_enc_thread: pid = 454, itv = 0xffffffff880f37a0
ivtv: ivtv_dec_thread: pid = 455, itv = 0xffffffff880f37a0
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to NTSC.
saa7115: decoder set norm NTSC
saa7115: set audio: 0x01
saa7127: Setting Encoder Video Standard
saa7127: Set NTSC Video Mode
saa7127: Selecting NTSC video Standard
ivtv: Initialized WinTV PVR 350, card #0
ivtv: ==================== END INIT IVTV ====================
******************************************************
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
