Mike wrote:
I have a problem with my PVR500 tuners haveing a picture sort of
offset up and to the right. (leaves about 1 inch on the bottom and the
left side of the mpeg)
I have a 2mb example here
http://dustsmoke.com/download/test.mpeg
(built via cat /dev/video2 >> test.mpeg)
Anybody have any idea what would cause this?
Thanks,
-Mike
Well, I figured this out... I had to turn off VBI and then it works
great. But at the same time, disabling VBI completely anihilated my
PVR350's picture.. When it isn't just plain 'bad', the frame is split
right in the center of the screen or looking like a film real gone bad.
(The PVR-350 I can deal with for now, It seems like its picture just
sucks through every driver iteration which half inspired me to get the
500 in the first place... but never has it been as grainy as this.)
Maybe its just something I'm doing wrong here. (dmesg output on my
previous message)
alias char-major-61 lirc_i2c
alias char-major-81 videodev
alias char-major-81-0 ivtv
alias char-major-81-1 ivtv
alias char-major-81-2 ivtv
options ivtv ivtv_std=0,0,0 tuner=47,57,57 tda9887=0,0,0 ivtv_debug=1,1,1
#one driver release cx25840 couldn't see saa7127, so it is like this here
options cx25840 no_black_magic=1 i2c_enable=1,1
#another driver release of saa7127 tried to take over every tuner. which
made me set this.
options saa7127 i2c_enable=1,-1,-1
options msp3400 once=1 simple=1
-Mike
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
