Mike wrote:
Ok, it was at 0.3.7k already but I tried removing all of the options
again. I could have forgotten to update-modules the last time I tried
that, or maybe it was because I remembered to do a cold reboot this time.
But before I left for work today I ran through all of the tuners changing
the channels around and it seemed to be fine now. (changing the channel
last time is what really messed up the 350 last time)
I think it was just something I was doing wrong, but if it happens again
I'll be sure to reply to this thread.
Thanks
-Mike
Oops, scratch that. Its still doing it. I turned it on and it still
seemed fine but left it alone for a little while and came back with a
really grainy picture. So i switched to another channel that it normally
gets a decent reception to and it started going crazy again.
I made a 4.5mb file so you can see what I'm talking about. (cat
/dev/video0 >> pvr350.mpeg)
http://dustsmoke.com/download/pvr350.mpeg
When I had vbi enabled it was fine, and the 500 was messed up. But the
500 works great now and the 350 does this now that vbi is turned off.
-Mike
Here is this
alias char-major-61 lirc_i2c
alias char-major-81 videodev
alias char-major-81-0 ivtv
alias char-major-81-1 ivtv
alias char-major-81-2 ivtv
#options ivtv ivtv_std=0,0,0 tuner=47,57,57 tda9887=0,0,0 ivtv_debug=1,1,1
#options cx25840 no_black_magic=1 i2c_enable=1,1
#options saa7127 i2c_enable=1,-1,-1
#options msp3400 once=1 simple=1
and here is my dmesg
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.7 (k) loading
ivtv: Linux version: 2.6.8-2-k7 preempt K7 gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 350 card (iTVC15 based)
ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 10 (level, low) -> IRQ 10
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
tveeprom: Ignoring new-style parameters in presence of obsolete ones
tveeprom: Hauppauge: model = 48132, rev = K268, serial# = 7875498
tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio processor = MSP4448 (type = 1b)
tveeprom: decoder processor = SAA7115 (type = 13)
ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50]
tuner: Ignoring new-style parameters in presence of obsolete ones
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61]
saa7115: Ignoring new-style parameters in presence of obsolete ones
ivtv: i2c attach to card #0 ok [client=saa7115[50], addr=21]
saa7127: Ignoring new-style parameters in presence of obsolete ones
ivtv: i2c attach to card #0 ok [client=saa7127[50], addr=44]
msp3400: Ignoring new-style parameters in presence of obsolete ones
msp34xx: ivtv version
msp34xx: init: chip=MSP3448W-A2, has NICAM support, simple (D) mode,
simpler (G) no-thread mode
msp34xx: $Id$ compiled on: Aug 29 2005 20:53:34
ivtv: i2c attach to card #0 ok [client=MSP3448W-A2, addr=40]
ivtv: Encoder revision: 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total)
ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total)
ivtv: Create DMA encoder VBI stream: 0 x 17472 buffers (0KB total)
ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total)
ivtv: Create encoder radio stream
ivtv: Create DMA decoder MPEG stream: 0 x 65536 buffers (0KB total)
ivtv: Create DMA decoder VBI stream: 0 x 2048 buffers (0KB total)
ivtv: Create decoder VOUT stream
ivtv: Create DMA decoder YUV stream: 0 x 43200 buffers (0KB total)
ivtv: Create DMA decoder OSD stream: 0 x 65536 buffers (0KB total)
tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #0
ivtv: Initialized WinTV PVR 350, card #0
ivtv: ====================== NEXT CARD ======================
ivtv: Autodetected WinTV PVR 150 card (iTVC16 based)
ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 12 (level, low) -> IRQ 12
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
tveeprom: Hauppauge: model = 23552, rev = D592, serial# = 2994978
tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio processor = CX25843 (type = 25)
tveeprom: decoder processor = CX25843 (type = 1e)
ivtv: i2c attach to card #1 ok [client=tveeprom[50], addr=50]
tuner: chip found at addr 0xc0 i2c-bus ivtv i2c driver #1
TEA5767 detected.
ivtv: i2c attach to card #1 ok [client=(tuner unset), addr=60]
tuner: type set to 62 (Philips TEA5767HN FM Radio) by autodetect
type set to 62 (Philips TEA5767HN FM Radio)
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1
ivtv: i2c attach to card #1 ok [client=(tuner unset), addr=61]
ivtv: This is the first unit of a PVR500
cx25840: Ignoring new-style parameters in presence of obsolete ones
cx25840: firmware /lib/modules/HcwMakoA.ROM loaded
ivtv: i2c attach to card #1 ok [client=cx25840[50], addr=44]
wm8775: Ignoring new-style parameters in presence of obsolete ones
ivtv: i2c attach to card #1 ok [client=wm8775[50], addr=1b]
ivtv: Detected a TEA5767 radio tuner. Enabling radio support.
ivtv: Encoder revision: 0x02040011
ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total)
ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total)
ivtv: Create DMA encoder VBI stream: 0 x 17472 buffers (0KB total)
ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total)
ivtv: Create encoder radio stream
tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #1
ivtv: Initialized WinTV PVR 150, card #1
ivtv: ====================== NEXT CARD ======================
ivtv: Autodetected WinTV PVR 150 card (iTVC16 based)
ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 11 (level, low) -> IRQ 11
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
tveeprom: Hauppauge: model = 23552, rev = D592, serial# = 2994978
tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio processor = CX25843 (type = 25)
tveeprom: decoder processor = CX25843 (type = 1e)
ivtv: i2c attach to card #2 ok [client=tveeprom[50], addr=50]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #2
ivtv: i2c attach to card #2 ok [client=(tuner unset), addr=61]
cx25840: firmware /lib/modules/HcwMakoA.ROM loaded
ivtv: i2c attach to card #2 ok [client=cx25840[50], addr=44]
ivtv: i2c attach to card #2 ok [client=wm8775[50], addr=1b]
ivtv: This is the second unit of a PVR500
ivtv: Correcting tveeprom data: no radio present on second tuner
ivtv: Encoder revision: 0x02040011
ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total)
ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total)
ivtv: Create DMA encoder VBI stream: 0 x 17472 buffers (0KB total)
ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total)
tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #2
ivtv: Initialized WinTV PVR 150, card #2
ivtv: ==================== END INIT IVTV ====================
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
