Hi I've now managed to get an unmodified copy of the SVN version of 0.3.8 working with my Adaptec AVC-2410.
After reading through the i2c captured data and not finding any major problems I went back to 0.3.2d (unmodified) and spent sometime trying different parameter settings etc to get it to work. I then used the similar parameter settings etc on 0.3.8 (unmodified) and have now got that working. I will have to try using the cs53l32a module again and then start modifying the code so as to automate the fiddly setting up required to get it working. I need to set the card type to PVR250 to get the card working at the moment. If I use ivtvctl -r to set the frequency and ivtvctl -p4 to switch to tuner and then use mplayer /dev/video0 Everything works fine, however when I use it with mythtv-0.17 I getting stuttering Audio / Video0, even after closing mythfrontend and mythbackend and running mplayer /dev/video0 and switching back to composite input it still stutters. If I reboot it then works OK unless I rerun mythtv-0.17. I don't have a problem with mythtv using ivtv-0.3.2d, so do I need to use a later version of mythtv to work with ivtv-0.3.8. Best Regards Trev ------------------------------------------------------- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
