Thanks for your kindly reply, I have tried "cat /dev/input/event7" & "cat /dev/input/event8" and there some messages showing out when I touch the panel.
The version of xorg-server I use doesn't have xorg.conf, fdi file instead. And the MPX is already, I have tried two mouses work in the same time correctly. It seems that the fdi file which I set don't have any effect. 2009/6/20 Pei Lin <[email protected]>: > u can go to the xorg maillist to get more information. > i guess whether your xorg-server version is the "right" version to > support multi-touch and your configuration about your device in > xorg.conf file is "right" or not. > > By the way, u can "cat /dev/input/event7" or "cat /dev/input/event8" > and use your device to see there is something output in your screen to > prove your driver work normally. > > BRs, > > Lin > > 2009/6/19 guo jerry <[email protected]>: >> Hi all, >> I have written my multi-touch panel device driver and register >> two input devices. >> they appear in /dev/input/event7 & /dev/input/event8. The >> problem is that why >> X window can read other mouse devices automatically and work under X >> environment but the device driver written by my own cannot. >> I guess that if the evbit and keybit which I set is not correctly. >> I set my evbit & keybit as following: >> >> input->evbit[0] = BIT_MASK(EV_KEY) || BIT_MASK(EV_ABS); >> input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); >> >> I'd like solve the problem first then take into issue that how to >> make >> multi-touch work in MPX. >> >> Thanks in advanced. >> >> -- >> To unsubscribe from this list: send an email with >> "unsubscribe kernelnewbies" to [email protected] >> Please read the FAQ at http://kernelnewbies.org/FAQ >> >> > -- To unsubscribe from this list: send an email with "unsubscribe kernelnewbies" to [email protected] Please read the FAQ at http://kernelnewbies.org/FAQ
