Hi Alan, I thanked you in the earlier email but since it was in "Rich Text" format, may not have reached you. What can I say, you are the best! I did 802.3ad and worked like a charm!
Wish you all great weekend! Warm Regards, Tom On 04/13/17, Alan Altmarkcom> wrote: On Wednesday, 04/12/2017 at 10:38 GMT, canzon...@verizon.net wrote: > Hi Mark, > Thank you. I want both slaves active at the same time. The testing is done dropping link2 so that > the link2 pick it up. And, when that link1 is bought up and drop link2. > > I would appreciate if you can give little more insight to this. Tom, you need to choose either active-backup or 802.3ad. Forget the other modes. Of the two, only in 802.3ad are both interfaces active at the same time, and that only works because the physical switch is participating in the illusion. The advantage of 802.3ad (link aggregation) over active-backup are twofold: 1) No packet loss during failover 2) More bandwidth than available from single interface If you don't need either, then active-backup is good enough. Alan Altmark Senior Managing z/VM and Linux Consultant Lab Services System z Delivery Practice IBM Systems & Technology Group ibm.com/systems/services/labservices office: 607.429.3323 mobile; 607.321.7556 alan_altm...@us.ibm.com IBM Endicott ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/ ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/