Scott wrote: > cx2388x dvb driver version 0.0.5 loaded > CORE cx88[0]: subsystem: 18ac:d500, board: DViCO FusionHDTV 5 Gold > [card=31,autodetected] > TV tuner 64 at 0x1fe, Radio tuner -1 at 0x1fe > ACPI: PCI Interrupt 0000:04:02.2[A] -> Link [LNKH] -> GSI 7 (level, low) > -> IRQ 7 > cx88[0]/2: found at 0000:04:02.2, rev: 5, irq: 7, latency: 32, mmio: > 0xfd000000 > cx88[0]/2: cx2388x based dvb card > DVB: registering new adapter (cx88[0]). > DVB: registering frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)... > > This seems to match my actual device which is the "FusionHDTV 5 RT > Gold". I had read that the "FusionHDTV5 RT Gold" and the "FusionHDTV5 > Gold Plus" were actually identical boards. The chips seemed to match up > with the modules and the dvb-v4l tables I've seen. > > 04:02.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and > Audio Decoder [MPEG Port] (rev 05) > Subsystem: DViCO Corporation DViCO FusionHDTV5 Gold > Flags: bus master, medium devsel, latency 32, IRQ 7 > Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
That is correct. The "FusionHDTV5 RT Gold" is identical to the "FusionHDTV5 Gold" The only difference is that the RT model has an RTC, and you might notice two addional addresses on the i2c bus. The RT functionality is not yet supported under linux, but the card has 100% functionality for atsc capture and analog framegrabbing. HTH, Mike Krufky _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
