On Sun, 16 Mar 2008 11:31:37 +0100 Matthias Schwarzott <[EMAIL PROTECTED]> wrote:
> Hi there! > > I updated this patch to support both Avermedia A700 cards (AverTV DVB-S Pro > and AverTV DVB-S Hybrid+FM). > > The RF input of the Hybrid+FM card (with XC2028 tuner) is still untested. > > I would be happy if any of the XC2028 experts could have a look at this patch. For this to work, you'll need to set xc3028 parameters. This device needs a reset during firmware load. This is done via xc3028_callback. To reset, you need to turn some GPIO values, and then, return they back to their original values. The GPIO's are device dependent. So, you'll need to check with some software like Dscaler's regspy.exe what pins are changed during reset. Also, there are two ways for audio to work with xc3028/2028: MTS mode and non-mts. You'll need to test both ways. A final notice: most current devices work fine with firmware v2.7. However, a few devices only work if you use an older firmware version. Could you please send us the logs with i2c_scan=1? Please, use the latest version of v4l-dvb, since I did some fixes for cx88 and saa7134 there recently. Cheers, Mauro _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
