Am 29.01.22 um 01:45 schrieb Ian Eure:
After wiping the partition table, FAI is able to install without
errors and I get a bootable system at the end.
For sustained wiping of disks you could use something along these lines:
<snip>
mdadm --stop /dev/md0
mdadm --zero-superblock --force /dev/sda
sgdisk --zap-all /dev/sda
</snip>
or use the mighty (and dangerous) "wipe-all"-hook at [1].
But be careful to wipe the correct disk(s)! Automated wiping of disks
can be pretty catastrophic, especially in multi-disk setups. For local
servers I personally tend to physically remove all disks that should be
conserved during FAI installation, just in case.
Robert
[1] https://fai-project.org/download/misc/wipe-all
