On Tuesday 03 July 2007, Sergei Shtylyov wrote:
> Hello.
>
> Bartlomiej Zolnierkiewicz wrote:
>
> > * Add ATA_PIO[0-6] defines to <linux/ata.h>.
>
> > * Add ->pio_mask field to ide_pci_device_t and ide_hwif_t.
>
> > * Add PIO masks to host drivers.
>
> Hm, the next logical step would be to use the mask constants in
> <linux/ata.h> for the drivers' DMA caps too...
Patches welcomed. :-)
> > Signed-off-by: Bartlomiej Zolnierkiewicz <[EMAIL PROTECTED]>
>
> Acked-by: Sergei Shtylyov <[EMAIL PROTECTED]>
added
> > Index: b/drivers/ide/pci/it8213.c
> > ===================================================================
> > --- a/drivers/ide/pci/it8213.c
> > +++ b/drivers/ide/pci/it8213.c
> > @@ -276,6 +276,7 @@ static void __devinit init_hwif_it8213(i
> > .enablebits = {{0x41,0x80,0x80}}, \
> > .bootable = ON_BOARD, \
> > .host_flags = IDE_HFLAG_SINGLE, \
> > + .pio_mask = ATA_PIO4, \
> > }
> >
> > static ide_pci_device_t it8213_chipsets[] __devinitdata = {
> [...]
> > Index: b/drivers/ide/pci/piix.c
> > ===================================================================
> > --- a/drivers/ide/pci/piix.c
> > +++ b/drivers/ide/pci/piix.c
> > @@ -498,6 +498,7 @@ static void __devinit init_hwif_piix(ide
> > .autodma = AUTODMA, \
> > .enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \
> > .bootable = ON_BOARD, \
> > + .pio_mask = ATA_PIO4, \
> > .udma_mask = udma, \
> > }
> >
> > @@ -517,6 +518,7 @@ static ide_pci_device_t piix_pci_info[]
> > .enablebits = {{0x6d,0xc0,0x80}, {0x6d,0xc0,0xc0}},
> > .bootable = ON_BOARD,
> > .host_flags = IDE_HFLAG_ISA_PORTS,
> > + .pio_mask = ATA_PIO4,
> > },
> >
> > /* 3 */ DECLARE_PIIX_DEV("PIIX3", 0x00), /* no udma */
> [...]
> > Index: b/drivers/ide/pci/slc90e66.c
> > ===================================================================
> > --- a/drivers/ide/pci/slc90e66.c
> > +++ b/drivers/ide/pci/slc90e66.c
> > @@ -217,6 +217,7 @@ static ide_pci_device_t slc90e66_chipset
> > .autodma = AUTODMA,
> > .enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}},
> > .bootable = ON_BOARD,
> > + .pio_mask = ATA_PIO4,
> > };
> >
> > static int __devinit slc90e66_init_one(struct pci_dev *dev, const struct
> pci_device_id *id)
>
> Strictly speaking, these Intel/SMsC/ITE chips don't support PIO mode 1,
> only modes 0 and 2 thru 4 but the drivers are just using PIO0 timings for
> PIO1...
Reminds about a need to fix PIO1 in ->speedproc for Intel/SMsC (will do it).
Thanks,
Bart
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
