Jeff Garzik wrote: > Tejun Heo wrote: >> This patch implements libata.force module parameter which can >> selectively override ATA port, link and device configurations >> including cable type, SATA PHY SPD limit, transfer mode and NCQ. >> >> For example, you can say "use 1.5Gbps for all fan-out ports attached >> to the second port but allow 3.0Gbps for the PMP device itself, oh, >> the device attached to the third fan-out port chokes on NCQ and >> shouldn't go over UDMA4" by the following. >> >> libata.force=2:1.5g,2.15:3.0g,2.03:noncq,udma4 >> >> Signed-off-by: Tejun Heo <[EMAIL PROTECTED]> >> --- >> I guess it's about time we add something like this. More than >> anything else this should help debugging and can serve as a last >> resort to work around problems. >> >> Thanks. >> >> Documentation/kernel-parameters.txt | 35 +++ >> drivers/ata/libata-core.c | 375 >> +++++++++++++++++++++++++++++++++++- >> drivers/ata/libata-eh.c | 8 >> drivers/ata/libata.h | 1 4 files changed, 415 >> insertions(+), 4 deletions(-) > > ACK, but it breaks the build due to section type conflicts: > > drivers/ata/libata-core.c:108: error: ata_force_param_buf causes a > section type conflict > > Given that the data is marked __initdata and the code is marked __init, > I cannot see the problem.
Jeff, this no longer causes build failure whether libata is configured built-in or as a module. I have no idea what's going on but there doesn't seem to be a proper solution on the horizon yet. I think we can go ahead and commit this one and convert it to __initdataconst when it becomes available. Thanks. -- tejun - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
