Sorry - just noticed I cut off part of the error message, so here it is again:
WARNING: RXTX Version mismatch Jar version = RXTX-2.2 native lib Version = RXTX-2.2pre2 Binary sketch size: 1,056 bytes (of a 32,256 byte maximum) avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x00 On Tue, 20 Jun 2017 13:32:28 +0300 Shlomo Solomon <shl...@the-solomons.net> wrote: > I installed the Arduino IDE from Mageia RPMs and added my user to the > lock group as instructed. > > In the tools >> serial port menu, there is no /dev/ttyUSB0 - > only /dev/ttyS0 and /dev/ttyS1. I tried both of them but could not > upload a program. I read that sometimes Arduino needs to be run as > root, so I tried that too with no success. Here's what I get when I > try to upload: > > Binary sketch size: 1,056 bytes (of a 32,256 byte maximum) > Binary sketch size: 1,056 bytes (of a 32,256 byte maximum) > avrdude: stk500_recv(): programmer is not responding > avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00 > avrdude: stk500_recv(): programmer is not responding > avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x00 > avrdude: stk500_recv(): programmer is not responding > > > -- Shlomo Solomon http://the-solomons.net Sent by Claws Mail 3.11.1 - KDE 4.14.5 - LINUX Mageia 5 _______________________________________________ Linux-il mailing list Linux-il@cs.huji.ac.il http://mailman.cs.huji.ac.il/mailman/listinfo/linux-il