Viresh Kumar <viresh.ku...@linaro.org> writes:
> On 17-11-15, 12:06, Punit Agrawal wrote:
>> Register passive cooling devices when initialising cpufreq on
>> big.LITTLE systems. If the device tree provides a dynamic power
>> coefficient for the CPUs then the bound cooling device will support
>> the extensions that allow it to be used with all the existing thermal
>> governors including the power allocator governor.
>>
>> A cooling device will be created per individual frequency domain and
>> can be bound to thermal zones via the thermal DT bindings.
>>
>> Signed-off-by: Punit Agrawal <punit.agra...@arm.com>
>> Cc: Viresh Kumar <viresh.ku...@linaro.org>
>> Cc: Sudeep Holla <sudeep.ho...@arm.com>
>> Cc: Eduardo Valentin <edubez...@gmail.com>
>> ---
>> drivers/cpufreq/Kconfig.arm | 2 ++
>> drivers/cpufreq/arm_big_little.c | 41
>> ++++++++++++++++++++++++++++++++++++++++
>> 2 files changed, 43 insertions(+)
>>
>> diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
>> index 1582c1c..0e0052e 100644
>> --- a/drivers/cpufreq/Kconfig.arm
>> +++ b/drivers/cpufreq/Kconfig.arm
>> @@ -6,6 +6,8 @@
>> config ARM_BIG_LITTLE_CPUFREQ
>> tristate "Generic ARM big LITTLE CPUfreq driver"
>> depends on (ARM_CPU_TOPOLOGY || ARM64) && HAVE_CLK
>> + # if CPU_THERMAL is on and THERMAL=m, ARM_BIT_LITTLE_CPUFREQ cannot be
>> =y
>> + depends on !CPU_THERMAL || THERMAL
>> select PM_OPP
>> help
>> This enables the Generic CPUfreq driver for ARM big.LITTLE platforms.
>> diff --git a/drivers/cpufreq/arm_big_little.c
>> b/drivers/cpufreq/arm_big_little.c
>> index c5d256c..c251247 100644
>> --- a/drivers/cpufreq/arm_big_little.c
>> +++ b/drivers/cpufreq/arm_big_little.c
>> @@ -23,6 +23,7 @@
>> #include <linux/cpu.h>
>> #include <linux/cpufreq.h>
>> #include <linux/cpumask.h>
>> +#include <linux/cpu_cooling.h>
>> #include <linux/export.h>
>> #include <linux/module.h>
>> #include <linux/mutex.h>
>> @@ -55,6 +56,7 @@ static bool bL_switching_enabled;
>> #define ACTUAL_FREQ(cluster, freq) ((cluster == A7_CLUSTER) ? freq << 1 :
>> freq)
>> #define VIRT_FREQ(cluster, freq) ((cluster == A7_CLUSTER) ? freq >> 1 :
>> freq)
>>
>> +static struct thermal_cooling_device *cdev[MAX_CLUSTERS];
>> static struct cpufreq_arm_bL_ops *arm_bL_ops;
>> static struct clk *clk[MAX_CLUSTERS];
>> static struct cpufreq_frequency_table *freq_table[MAX_CLUSTERS + 1];
>> @@ -493,6 +495,12 @@ static int bL_cpufreq_init(struct cpufreq_policy
>> *policy)
>> static int bL_cpufreq_exit(struct cpufreq_policy *policy)
>> {
>> struct device *cpu_dev;
>> + int cur_cluster = cpu_to_cluster(policy->cpu);
>> +
>> + if (cur_cluster < MAX_CLUSTERS) {
>> + cpufreq_cooling_unregister(cdev[cur_cluster]);
>> + cdev[cur_cluster] = NULL;
>> + }
>>
>> cpu_dev = get_cpu_device(policy->cpu);
>> if (!cpu_dev) {
>> @@ -507,6 +515,38 @@ static int bL_cpufreq_exit(struct cpufreq_policy
>> *policy)
>> return 0;
>> }
>>
>> +static void bL_cpufreq_ready(struct cpufreq_policy *policy)
>> +{
>> + struct device *cpu_dev = get_cpu_device(policy->cpu);
>> + int cur_cluster = cpu_to_cluster(policy->cpu);
>> + struct device_node *np;
>> +
>> + /* Do not register a cpu_cooling device if we are in IKS mode */
>> + if (cur_cluster >= MAX_CLUSTERS)
>> + return;
>> +
>> + np = of_node_get(cpu_dev->of_node);
>> + if (WARN_ON(!np))
>> + return;
>> +
>> + if (of_find_property(np, "#cooling-cells", NULL)) {
>> + u32 power_coefficient = 0;
>> +
>> + of_property_read_u32(np, "dynamic-power-coefficient",
>> + &power_coefficient);
>> +
>> + cdev[cur_cluster] = of_cpufreq_power_cooling_register(np,
>> + policy->related_cpus, power_coefficient, NULL);
>> + if (IS_ERR(cdev[cur_cluster])) {
>> + dev_err(cpu_dev,
>> + "running cpufreq without cooling device: %ld\n",
>> + PTR_ERR(cdev[cur_cluster]));
>> + cdev[cur_cluster] = NULL;
>> + }
>> + }
>> + of_node_put(np);
>> +}
>> +
>> static struct cpufreq_driver bL_cpufreq_driver = {
>> .name = "arm-big-little",
>> .flags = CPUFREQ_STICKY |
>> @@ -517,6 +557,7 @@ static struct cpufreq_driver bL_cpufreq_driver = {
>> .get = bL_cpufreq_get_rate,
>> .init = bL_cpufreq_init,
>> .exit = bL_cpufreq_exit,
>> + .ready = bL_cpufreq_ready,
>> .attr = cpufreq_generic_attr,
>> };
>
> Acked-by: Viresh Kumar <viresh.ku...@linaro.org>
Thanks for the Ack.
Will you or Rafael be picking up the series or do they need to go via
arm-soc?
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
