From: Logan Gunthorpe
> On 15/06/16 03:49 PM, Allen Hubbe wrote:
> >> +function link_test()
> >> +{
> >> + LOC=$1
> >> + REM=$2
> >> + EXP=0
> >> +
> >> + echo "Running link tests on: $(basename $LOC) / $(basename $REM)"
> >> +
> >> + write_file "N" "$LOC/link"
> >> + write_file "N" "$LOC/link_event"
> >
> > If it fails to bring down the link, won't it just block waiting on
> > link_event and never
> make it to the next step of the test?
> >
> >> + if [[ $(read_file "$REM/link") != "N" ]]; then
> >> + echo "Expected remote link to be down in $REM/link" >&2
> >> + exit -1
> >> + fi
> >> +
> >> + write_file "Y" "$LOC/link"
> >> + write_file "Y" "$LOC/link_event"
> >> +
> >> + echo " Passed"
> >> +}
>
> Well, the test is really intended to ensure both sides of the link see
> changes to the link status. If the driver is somehow buggy and the link
> never goes down/up when requested there's little I can do here except
> block forever. Unless we want to add a timeout to the link_event file
> (which I'd rather not).
>
> You'd have the same issue if, when bringing the link up for the first
> time, the link does not come back.
The link might come up, but this test checks if the link can be forced down.
This test should fail on Intel RP/TB topology (two cpu sharing one ntb). The
link state is the link state of the secondary side pcie bus connected to the
secondary side cpu. The link must be up in order for the secondary side cpu to
discover the ntb device, so the driver does not allow the link to be disabled
in such topology.
A simple thing to do here might be:
write_file "N" "$LOC/link"
sleep 1
read_file "$REM/link"
You already have my Ack. This minor issue can be fixed later if anyone cares.
I don't think it is a big deal, just worth pointing out that the script will
hang here instead of report a failure. If it is worth fixing later, at that
point we might also want to change this script to continue with other tests
instead of exit on the first failure.
