By default, the 8xx pins an ITLB on the first 8M of memory in order
to avoid any ITLB miss on kernel code.
However, with some debug functions like DEBUG_PAGEALLOC and
DEBUG_RODATA, pinning TLBs is contradictory.
In order to avoid any ITLB miss in a critical section without pinning
TLBs, we have to ensure that there is no page boundary crossed between
the setup of a new value in SRR0/SRR1 and the associated RFI.
Today, the functions modifying srr0/srr1 are all located in
setup_32.S. They are spread over almost 4kbytes.
This patch reorganises setup_32.S to regroup those functions at the
beginning of the file. It regroups them within the first 2kbytes.
Then the patch forces an 11 bits (2kbytes) alignment for those
functions. This garanties that the functions remain in a
single 4k page.
Signed-off-by: Christophe Leroy <christophe.le...@c-s.fr>
---
This patch superseeds previous patch named "powerpc/32: Move entry_32
functions just after HEAD functions.", taking into account suggestion
from Michael.
No modification is done to the code, only a move was done.
arch/powerpc/kernel/entry_32.S | 509 +++++++++++++++++++++--------------------
1 file changed, 258 insertions(+), 251 deletions(-)
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index a38600949f3a..b46556571580 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -44,6 +44,13 @@
#define LOAD_MSR_KERNEL(r, x) li r,(x)
#endif
+/*
+ * Align to 2k in order to ensure that all functions modyfing srr0/srr1
+ * fit into one page in order to not encounter a TLB miss between the
+ * modification of srr0/srr1 and the associated rfi.
+ */
+ .align 11
+
#ifdef CONFIG_BOOKE
.globl mcheck_transfer_to_handler
mcheck_transfer_to_handler:
@@ -441,257 +448,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
66: li r3,-ENOSYS
b ret_from_syscall
- .globl ret_from_fork
-ret_from_fork:
- REST_NVGPRS(r1)
- bl schedule_tail
- li r3,0
- b ret_from_syscall
-
- .globl ret_from_kernel_thread
-ret_from_kernel_thread:
- REST_NVGPRS(r1)
- bl schedule_tail
- mtlr r14
- mr r3,r15
- PPC440EP_ERR42
- blrl
- li r3,0
- b ret_from_syscall
-
-/* Traced system call support */
-syscall_dotrace:
- SAVE_NVGPRS(r1)
- li r0,0xc00
- stw r0,_TRAP(r1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- bl do_syscall_trace_enter
- /*
- * Restore argument registers possibly just changed.
- * We use the return value of do_syscall_trace_enter
- * for call number to look up in the table (r0).
- */
- mr r0,r3
- lwz r3,GPR3(r1)
- lwz r4,GPR4(r1)
- lwz r5,GPR5(r1)
- lwz r6,GPR6(r1)
- lwz r7,GPR7(r1)
- lwz r8,GPR8(r1)
- REST_NVGPRS(r1)
-
- cmplwi r0,NR_syscalls
- /* Return code is already in r3 thanks to do_syscall_trace_enter() */
- bge- ret_from_syscall
- b syscall_dotrace_cont
-
-syscall_exit_work:
- andi. r0,r9,_TIF_RESTOREALL
- beq+ 0f
- REST_NVGPRS(r1)
- b 2f
-0: cmplw 0,r3,r8
- blt+ 1f
- andi. r0,r9,_TIF_NOERROR
- bne- 1f
- lwz r11,_CCR(r1) /* Load CR */
- neg r3,r3
- oris r11,r11,0x1000 /* Set SO bit in CR */
- stw r11,_CCR(r1)
-
-1: stw r6,RESULT(r1) /* Save result */
- stw r3,GPR3(r1) /* Update return value */
-2: andi. r0,r9,(_TIF_PERSYSCALL_MASK)
- beq 4f
-
- /* Clear per-syscall TIF flags if any are set. */
-
- li r11,_TIF_PERSYSCALL_MASK
- addi r12,r12,TI_FLAGS
-3: lwarx r8,0,r12
- andc r8,r8,r11
-#ifdef CONFIG_IBM405_ERR77
- dcbt 0,r12
-#endif
- stwcx. r8,0,r12
- bne- 3b
- subi r12,r12,TI_FLAGS
-
-4: /* Anything which requires enabling interrupts? */
- andi. r0,r9,(_TIF_SYSCALL_DOTRACE|_TIF_SINGLESTEP)
- beq ret_from_except
-
- /* Re-enable interrupts. There is no need to trace that with
- * lockdep as we are supposed to have IRQs on at this point
- */
- ori r10,r10,MSR_EE
- SYNC
- MTMSRD(r10)
-
- /* Save NVGPRS if they're not saved already */
- lwz r4,_TRAP(r1)
- andi. r4,r4,1
- beq 5f
- SAVE_NVGPRS(r1)
- li r4,0xc00
- stw r4,_TRAP(r1)
-5:
- addi r3,r1,STACK_FRAME_OVERHEAD
- bl do_syscall_trace_leave
- b ret_from_except_full
-
-/*
- * The fork/clone functions need to copy the full register set into
- * the child process. Therefore we need to save all the nonvolatile
- * registers (r13 - r31) before calling the C code.
- */
- .globl ppc_fork
-ppc_fork:
- SAVE_NVGPRS(r1)
- lwz r0,_TRAP(r1)
- rlwinm r0,r0,0,0,30 /* clear LSB to indicate full */
- stw r0,_TRAP(r1) /* register set saved */
- b sys_fork
-
- .globl ppc_vfork
-ppc_vfork:
- SAVE_NVGPRS(r1)
- lwz r0,_TRAP(r1)
- rlwinm r0,r0,0,0,30 /* clear LSB to indicate full */
- stw r0,_TRAP(r1) /* register set saved */
- b sys_vfork
-
- .globl ppc_clone
-ppc_clone:
- SAVE_NVGPRS(r1)
- lwz r0,_TRAP(r1)
- rlwinm r0,r0,0,0,30 /* clear LSB to indicate full */
- stw r0,_TRAP(r1) /* register set saved */
- b sys_clone
-
- .globl ppc_swapcontext
-ppc_swapcontext:
- SAVE_NVGPRS(r1)
- lwz r0,_TRAP(r1)
- rlwinm r0,r0,0,0,30 /* clear LSB to indicate full */
- stw r0,_TRAP(r1) /* register set saved */
- b sys_swapcontext
-
-/*
- * Top-level page fault handling.
- * This is in assembler because if do_page_fault tells us that
- * it is a bad kernel page fault, we want to save the non-volatile
- * registers before calling bad_page_fault.
- */
- .globl handle_page_fault
-handle_page_fault:
- stw r4,_DAR(r1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- bl do_page_fault
- cmpwi r3,0
- beq+ ret_from_except
- SAVE_NVGPRS(r1)
- lwz r0,_TRAP(r1)
- clrrwi r0,r0,1
- stw r0,_TRAP(r1)
- mr r5,r3
- addi r3,r1,STACK_FRAME_OVERHEAD
- lwz r4,_DAR(r1)
- bl bad_page_fault
- b ret_from_except_full
-
-/*
- * This routine switches between two different tasks. The process
- * state of one is saved on its kernel stack. Then the state
- * of the other is restored from its kernel stack. The memory
- * management hardware is updated to the second process's state.
- * Finally, we can return to the second process.
- * On entry, r3 points to the THREAD for the current task, r4
- * points to the THREAD for the new task.
- *
- * This routine is always called with interrupts disabled.
- *
- * Note: there are two ways to get to the "going out" portion
- * of this code; either by coming in via the entry (_switch)
- * or via "fork" which must set up an environment equivalent
- * to the "_switch" path. If you change this , you'll have to
- * change the fork code also.
- *
- * The code which creates the new task context is in 'copy_thread'
- * in arch/ppc/kernel/process.c
- */
-_GLOBAL(_switch)
- stwu r1,-INT_FRAME_SIZE(r1)
- mflr r0
- stw r0,INT_FRAME_SIZE+4(r1)
- /* r3-r12 are caller saved -- Cort */
- SAVE_NVGPRS(r1)
- stw r0,_NIP(r1) /* Return to switch caller */
- mfmsr r11
- li r0,MSR_FP /* Disable floating-point */
-#ifdef CONFIG_ALTIVEC
-BEGIN_FTR_SECTION
- oris r0,r0,MSR_VEC@h /* Disable altivec */
- mfspr r12,SPRN_VRSAVE /* save vrsave register value */
- stw r12,THREAD+THREAD_VRSAVE(r2)
-END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
-#endif /* CONFIG_ALTIVEC */
-#ifdef CONFIG_SPE
-BEGIN_FTR_SECTION
- oris r0,r0,MSR_SPE@h /* Disable SPE */
- mfspr r12,SPRN_SPEFSCR /* save spefscr register value */
- stw r12,THREAD+THREAD_SPEFSCR(r2)
-END_FTR_SECTION_IFSET(CPU_FTR_SPE)
-#endif /* CONFIG_SPE */
- and. r0,r0,r11 /* FP or altivec or SPE enabled? */
- beq+ 1f
- andc r11,r11,r0
- MTMSRD(r11)
- isync
-1: stw r11,_MSR(r1)
- mfcr r10
- stw r10,_CCR(r1)
- stw r1,KSP(r3) /* Set old stack pointer */
-
-#ifdef CONFIG_SMP
- /* We need a sync somewhere here to make sure that if the
- * previous task gets rescheduled on another CPU, it sees all
- * stores it has performed on this one.
- */
- sync
-#endif /* CONFIG_SMP */
-
- tophys(r0,r4)
- mtspr SPRN_SPRG_THREAD,r0 /* Update current THREAD phys addr */
- lwz r1,KSP(r4) /* Load new stack pointer */
-
- /* save the old current 'last' for return value */
- mr r3,r2
- addi r2,r4,-THREAD /* Update current */
-
-#ifdef CONFIG_ALTIVEC
-BEGIN_FTR_SECTION
- lwz r0,THREAD+THREAD_VRSAVE(r2)
- mtspr SPRN_VRSAVE,r0 /* if G4, restore VRSAVE reg */
-END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
-#endif /* CONFIG_ALTIVEC */
-#ifdef CONFIG_SPE
-BEGIN_FTR_SECTION
- lwz r0,THREAD+THREAD_SPEFSCR(r2)
- mtspr SPRN_SPEFSCR,r0 /* restore SPEFSCR reg */
-END_FTR_SECTION_IFSET(CPU_FTR_SPE)
-#endif /* CONFIG_SPE */
-
- lwz r0,_CCR(r1)
- mtcrf 0xFF,r0
- /* r3-r12 are destroyed -- Cort */
- REST_NVGPRS(r1)
-
- lwz r4,_NIP(r1) /* Return to _switch caller in new task */
- mtlr r4
- addi r1,r1,INT_FRAME_SIZE
- blr
-
.globl fast_exception_return
fast_exception_return:
#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
@@ -1182,6 +938,257 @@ global_dbcr0:
.previous
#endif /* !(CONFIG_4xx || CONFIG_BOOKE) */
+ .globl ret_from_fork
+ret_from_fork:
+ REST_NVGPRS(r1)
+ bl schedule_tail
+ li r3,0
+ b ret_from_syscall
+
+ .globl ret_from_kernel_thread
+ret_from_kernel_thread:
+ REST_NVGPRS(r1)
+ bl schedule_tail
+ mtlr r14
+ mr r3,r15
+ PPC440EP_ERR42
+ blrl
+ li r3,0
+ b ret_from_syscall
+
+/* Traced system call support */
+syscall_dotrace:
+ SAVE_NVGPRS(r1)
+ li r0,0xc00
+ stw r0,_TRAP(r1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl do_syscall_trace_enter
+ /*
+ * Restore argument registers possibly just changed.
+ * We use the return value of do_syscall_trace_enter
+ * for call number to look up in the table (r0).
+ */
+ mr r0,r3
+ lwz r3,GPR3(r1)
+ lwz r4,GPR4(r1)
+ lwz r5,GPR5(r1)
+ lwz r6,GPR6(r1)
+ lwz r7,GPR7(r1)
+ lwz r8,GPR8(r1)
+ REST_NVGPRS(r1)
+
+ cmplwi r0,NR_syscalls
+ /* Return code is already in r3 thanks to do_syscall_trace_enter() */
+ bge- ret_from_syscall
+ b syscall_dotrace_cont
+
+syscall_exit_work:
+ andi. r0,r9,_TIF_RESTOREALL
+ beq+ 0f
+ REST_NVGPRS(r1)
+ b 2f
+0: cmplw 0,r3,r8
+ blt+ 1f
+ andi. r0,r9,_TIF_NOERROR
+ bne- 1f
+ lwz r11,_CCR(r1) /* Load CR */
+ neg r3,r3
+ oris r11,r11,0x1000 /* Set SO bit in CR */
+ stw r11,_CCR(r1)
+
+1: stw r6,RESULT(r1) /* Save result */
+ stw r3,GPR3(r1) /* Update return value */
+2: andi. r0,r9,(_TIF_PERSYSCALL_MASK)
+ beq 4f
+
+ /* Clear per-syscall TIF flags if any are set. */
+
+ li r11,_TIF_PERSYSCALL_MASK
+ addi r12,r12,TI_FLAGS
+3: lwarx r8,0,r12
+ andc r8,r8,r11
+#ifdef CONFIG_IBM405_ERR77
+ dcbt 0,r12
+#endif
+ stwcx. r8,0,r12
+ bne- 3b
+ subi r12,r12,TI_FLAGS
+
+4: /* Anything which requires enabling interrupts? */
+ andi. r0,r9,(_TIF_SYSCALL_DOTRACE|_TIF_SINGLESTEP)
+ beq ret_from_except
+
+ /* Re-enable interrupts. There is no need to trace that with
+ * lockdep as we are supposed to have IRQs on at this point
+ */
+ ori r10,r10,MSR_EE
+ SYNC
+ MTMSRD(r10)
+
+ /* Save NVGPRS if they're not saved already */
+ lwz r4,_TRAP(r1)
+ andi. r4,r4,1
+ beq 5f
+ SAVE_NVGPRS(r1)
+ li r4,0xc00
+ stw r4,_TRAP(r1)
+5:
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl do_syscall_trace_leave
+ b ret_from_except_full
+
+/*
+ * The fork/clone functions need to copy the full register set into
+ * the child process. Therefore we need to save all the nonvolatile
+ * registers (r13 - r31) before calling the C code.
+ */
+ .globl ppc_fork
+ppc_fork:
+ SAVE_NVGPRS(r1)
+ lwz r0,_TRAP(r1)
+ rlwinm r0,r0,0,0,30 /* clear LSB to indicate full */
+ stw r0,_TRAP(r1) /* register set saved */
+ b sys_fork
+
+ .globl ppc_vfork
+ppc_vfork:
+ SAVE_NVGPRS(r1)
+ lwz r0,_TRAP(r1)
+ rlwinm r0,r0,0,0,30 /* clear LSB to indicate full */
+ stw r0,_TRAP(r1) /* register set saved */
+ b sys_vfork
+
+ .globl ppc_clone
+ppc_clone:
+ SAVE_NVGPRS(r1)
+ lwz r0,_TRAP(r1)
+ rlwinm r0,r0,0,0,30 /* clear LSB to indicate full */
+ stw r0,_TRAP(r1) /* register set saved */
+ b sys_clone
+
+ .globl ppc_swapcontext
+ppc_swapcontext:
+ SAVE_NVGPRS(r1)
+ lwz r0,_TRAP(r1)
+ rlwinm r0,r0,0,0,30 /* clear LSB to indicate full */
+ stw r0,_TRAP(r1) /* register set saved */
+ b sys_swapcontext
+
+/*
+ * Top-level page fault handling.
+ * This is in assembler because if do_page_fault tells us that
+ * it is a bad kernel page fault, we want to save the non-volatile
+ * registers before calling bad_page_fault.
+ */
+ .globl handle_page_fault
+handle_page_fault:
+ stw r4,_DAR(r1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl do_page_fault
+ cmpwi r3,0
+ beq+ ret_from_except
+ SAVE_NVGPRS(r1)
+ lwz r0,_TRAP(r1)
+ clrrwi r0,r0,1
+ stw r0,_TRAP(r1)
+ mr r5,r3
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ lwz r4,_DAR(r1)
+ bl bad_page_fault
+ b ret_from_except_full
+
+/*
+ * This routine switches between two different tasks. The process
+ * state of one is saved on its kernel stack. Then the state
+ * of the other is restored from its kernel stack. The memory
+ * management hardware is updated to the second process's state.
+ * Finally, we can return to the second process.
+ * On entry, r3 points to the THREAD for the current task, r4
+ * points to the THREAD for the new task.
+ *
+ * This routine is always called with interrupts disabled.
+ *
+ * Note: there are two ways to get to the "going out" portion
+ * of this code; either by coming in via the entry (_switch)
+ * or via "fork" which must set up an environment equivalent
+ * to the "_switch" path. If you change this , you'll have to
+ * change the fork code also.
+ *
+ * The code which creates the new task context is in 'copy_thread'
+ * in arch/ppc/kernel/process.c
+ */
+_GLOBAL(_switch)
+ stwu r1,-INT_FRAME_SIZE(r1)
+ mflr r0
+ stw r0,INT_FRAME_SIZE+4(r1)
+ /* r3-r12 are caller saved -- Cort */
+ SAVE_NVGPRS(r1)
+ stw r0,_NIP(r1) /* Return to switch caller */
+ mfmsr r11
+ li r0,MSR_FP /* Disable floating-point */
+#ifdef CONFIG_ALTIVEC
+BEGIN_FTR_SECTION
+ oris r0,r0,MSR_VEC@h /* Disable altivec */
+ mfspr r12,SPRN_VRSAVE /* save vrsave register value */
+ stw r12,THREAD+THREAD_VRSAVE(r2)
+END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_SPE
+BEGIN_FTR_SECTION
+ oris r0,r0,MSR_SPE@h /* Disable SPE */
+ mfspr r12,SPRN_SPEFSCR /* save spefscr register value */
+ stw r12,THREAD+THREAD_SPEFSCR(r2)
+END_FTR_SECTION_IFSET(CPU_FTR_SPE)
+#endif /* CONFIG_SPE */
+ and. r0,r0,r11 /* FP or altivec or SPE enabled? */
+ beq+ 1f
+ andc r11,r11,r0
+ MTMSRD(r11)
+ isync
+1: stw r11,_MSR(r1)
+ mfcr r10
+ stw r10,_CCR(r1)
+ stw r1,KSP(r3) /* Set old stack pointer */
+
+#ifdef CONFIG_SMP
+ /* We need a sync somewhere here to make sure that if the
+ * previous task gets rescheduled on another CPU, it sees all
+ * stores it has performed on this one.
+ */
+ sync
+#endif /* CONFIG_SMP */
+
+ tophys(r0,r4)
+ mtspr SPRN_SPRG_THREAD,r0 /* Update current THREAD phys addr */
+ lwz r1,KSP(r4) /* Load new stack pointer */
+
+ /* save the old current 'last' for return value */
+ mr r3,r2
+ addi r2,r4,-THREAD /* Update current */
+
+#ifdef CONFIG_ALTIVEC
+BEGIN_FTR_SECTION
+ lwz r0,THREAD+THREAD_VRSAVE(r2)
+ mtspr SPRN_VRSAVE,r0 /* if G4, restore VRSAVE reg */
+END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_SPE
+BEGIN_FTR_SECTION
+ lwz r0,THREAD+THREAD_SPEFSCR(r2)
+ mtspr SPRN_SPEFSCR,r0 /* restore SPEFSCR reg */
+END_FTR_SECTION_IFSET(CPU_FTR_SPE)
+#endif /* CONFIG_SPE */
+
+ lwz r0,_CCR(r1)
+ mtcrf 0xFF,r0
+ /* r3-r12 are destroyed -- Cort */
+ REST_NVGPRS(r1)
+
+ lwz r4,_NIP(r1) /* Return to _switch caller in new task */
+ mtlr r4
+ addi r1,r1,INT_FRAME_SIZE
+ blr
+
do_work: /* r10 contains MSR_KERNEL here */
andi. r0,r9,_TIF_NEED_RESCHED
beq do_user_signal
--
2.12.0
