Add initial device tree support for the Qualcomm IPQ8074 SoC and
HK01 evaluation board.

Signed-off-by: Manoharan Vijaya Raghavan <mragh...@codeaurora.org>
Signed-off-by: Abhishek Sahu <abs...@codeaurora.org>
Signed-off-by: Varadarajan Narayanan <var...@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/Makefile         |   1 +
 arch/arm64/boot/dts/qcom/ipq8074-hk01.dts |  48 ++++++++++
 arch/arm64/boot/dts/qcom/ipq8074.dtsi     | 153 ++++++++++++++++++++++++++++++
 3 files changed, 202 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
 create mode 100644 arch/arm64/boot/dts/qcom/ipq8074.dtsi

diff --git a/arch/arm64/boot/dts/qcom/Makefile 
b/arch/arm64/boot/dts/qcom/Makefile
index cc0f02d..7c6963e 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += msm8992-bullhead-rev-101.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += msm8994-angler-rev-101.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += msm8996-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)        += ipq8074-hk01.dtb
 
 always         := $(dtb-y)
 subdir-y       := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts 
b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
new file mode 100644
index 0000000..c150bea
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -0,0 +1,48 @@
+/dts-v1/;
+/* Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include "ipq8074.dtsi"
+
+/ {
+       #address-cells = <0x2>;
+       #size-cells = <0x2>;
+       model = "Qualcomm Technologies, Inc. IPQ8074-HK01";
+       compatible = "qcom,ipq8074-hk01", "qcom,ipq8074";
+       interrupt-parent = <&intc>;
+
+       chosen {
+               bootargs = "console=ttyMSM0,115200,n8 root=/dev/ram0 rw 
init=/init";
+       };
+
+       memory {
+               device_type = "memory";
+               reg = <0x0 0x40000000 0x0 0x20000000>;
+       };
+
+       soc: soc {
+               pinctrl@1000000 {
+                       serial_4_pins: serial4_pinmux {
+                               mux {
+                                       pins = "gpio23", "gpio24";
+                                       function = "blsp4_uart1";
+                                       bias-disable;
+                               };
+                       };
+               };
+
+               serial@78b3000 {
+                       pinctrl-0 = <&serial_4_pins>;
+                       pinctrl-names = "default";
+                       status = "ok";
+               };
+       };
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi 
b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
new file mode 100644
index 0000000..f910cc0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -0,0 +1,153 @@
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-ipq8074.h>
+
+/ {
+       model = "Qualcomm Technologies, Inc. IPQ8074";
+       compatible = "qcom,ipq8074";
+
+       soc: soc {
+               #address-cells = <0x1>;
+               #size-cells = <0x1>;
+               ranges = <0 0 0 0xffffffff>;
+               compatible = "simple-bus";
+
+               pinctrl@1000000 {
+                       compatible = "qcom,ipq8074-pinctrl";
+                       reg = <0x1000000 0x300000>;
+                       interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+                       gpio-controller;
+                       #gpio-cells = <0x2>;
+                       interrupt-controller;
+                       #interrupt-cells = <0x2>;
+               };
+
+               intc: interrupt-controller@b000000 {
+                       compatible = "qcom,msm-qgic2";
+                       interrupt-controller;
+                       #interrupt-cells = <0x3>;
+                       reg = <0xb000000 0x1000>,
+                       <0xb002000 0x1000>;
+               };
+
+               timer {
+                       compatible = "arm,armv8-timer";
+                       interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | 
IRQ_TYPE_LEVEL_LOW)>,
+                                    <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | 
IRQ_TYPE_LEVEL_LOW)>,
+                                    <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | 
IRQ_TYPE_LEVEL_LOW)>,
+                                    <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | 
IRQ_TYPE_LEVEL_LOW)>;
+               };
+
+               gcc: gcc@1800000 {
+                       compatible = "qcom,gcc-ipq8074";
+                       reg = <0x1800000 0x80000>;
+                       #clock-cells = <0x1>;
+                       #reset-cells = <0x1>;
+               };
+
+               serial@78b3000 {
+                       compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+                       reg = <0x78b3000 0x200>;
+                       interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
+                                <&gcc GCC_BLSP1_AHB_CLK>;
+                       clock-names = "core", "iface";
+                       status = "disabled";
+               };
+       };
+
+       cpus {
+               #address-cells = <0x1>;
+               #size-cells = <0x0>;
+
+               cpu-map {
+
+                       cluster0 {
+
+                               core0 {
+                                       cpu = <&CPU0>;
+                               };
+
+                               core1 {
+                                       cpu = <&CPU1>;
+                               };
+
+                               core2 {
+                                       cpu = <&CPU2>;
+                               };
+
+                               core3 {
+                                       cpu = <&CPU3>;
+                               };
+                       };
+               };
+
+               CPU0: cpu@0 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a53", "arm,armv8";
+                       reg = <0x0>;
+                       next-level-cache = <&L2_0>;
+                       enable-method = "psci";
+               };
+
+               CPU1: cpu@1 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a53", "arm,armv8";
+                       enable-method = "psci";
+                       reg = <0x1>;
+                       next-level-cache = <&L2_0>;
+               };
+
+               CPU2: cpu@2 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a53", "arm,armv8";
+                       enable-method = "psci";
+                       reg = <0x2>;
+                       next-level-cache = <&L2_0>;
+               };
+
+               CPU3: cpu@3 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a53", "arm,armv8";
+                       enable-method = "psci";
+                       reg = <0x3>;
+                       next-level-cache = <&L2_0>;
+               };
+
+               L2_0: l2-cache {
+                       compatible = "cache";
+                       cache-level = <0x2>;
+               };
+       };
+
+       psci {
+               compatible = "arm,psci-1.0";
+               method = "smc";
+       };
+
+       clocks {
+               sleep_clk: sleep_clk {
+                       compatible = "fixed-clock";
+                       clock-frequency = <32000>;
+                       #clock-cells = <0>;
+               };
+
+               xo: xo {
+                       compatible = "fixed-clock";
+                       clock-frequency = <19200000>;
+                       #clock-cells = <0>;
+               };
+       };
+};
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of 
Code Aurora Forum, hosted by The Linux Foundation

Reply via email to