This patches follows the merged patchset that refactors I2C Designware and enables it to have I2C support.
The patch 1 adds the necessary functions to give the ability to be a SLAVE to the controller and for that changes also had to be made in the Makefile and Kconfig. The patch 2 enables the SLAVE mode to be detected by the platform module. The functionality was tested using the hardware independent slave-eeprom driver based on top of i2c/for-next. The tree I used can be found here: https://git.kernel.org/cgit/linux/kernel/git/wsa/linux.git/log/?h=i2c/for-next Luis Oliveira (2): i2c: designware: add SLAVE mode functions i2c: designware: enable SLAVE in platform module drivers/i2c/busses/Kconfig | 14 +- drivers/i2c/busses/Makefile | 3 + drivers/i2c/busses/i2c-designware-common.c | 6 + drivers/i2c/busses/i2c-designware-core.h | 4 + drivers/i2c/busses/i2c-designware-platdrv.c | 41 ++- drivers/i2c/busses/i2c-designware-slave.c | 395 ++++++++++++++++++++++++++++ 6 files changed, 457 insertions(+), 6 deletions(-) create mode 100644 drivers/i2c/busses/i2c-designware-slave.c -- 2.13.0
