$Subject ~= s/umap/unmap/
On Fri, Jun 30, 2017 at 02:04:44PM +0200, Romain Perier wrote:
> From: Nandor Han <nandor....@ge.com>
>
> This commits unmaps sg buffers when the DMA channel is released
>
> Signed-off-by: Nandor Han <nandor....@ge.com>
> Signed-off-by: Romain Perier <romain.per...@collabora.com>
> ---
> drivers/tty/serial/imx.c | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
> index e8cf7cf..58d6b1c 100644
> --- a/drivers/tty/serial/imx.c
> +++ b/drivers/tty/serial/imx.c
> @@ -1215,6 +1215,12 @@ static void imx_stop_tx_dma(struct imx_port *sport)
> temp = readl(sport->port.membase + UCR1);
> temp &= ~UCR1_TDMAEN;
> writel(temp, sport->port.membase + UCR1);
> +
> + if (sport->dma_is_txing) {
> + dma_unmap_sg(sport->port.dev, &sport->tx_sgl[0],
> + sport->dma_tx_nents, DMA_TO_DEVICE);
> + sport->dma_is_txing = 0;
You don't motivate setting dma_is_txing to zero in the commit log.
Does this mean the driver leaks memory in the current state?
> + }
> }
>
> static void imx_stop_rx_dma(struct imx_port *sport)
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
