From: "H. Nikolaus Schaller" <h...@goldelico.com>

This adds documentation of device tree bindings
for the OV965X family camera sensor module.

Signed-off-by: H. Nikolaus Schaller <h...@goldelico.com>
Signed-off-by: Hugues Fruchet <hugues.fruc...@st.com>
---
 .../devicetree/bindings/media/i2c/ov965x.txt       | 45 ++++++++++++++++++++++
 1 file changed, 45 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/ov965x.txt

diff --git a/Documentation/devicetree/bindings/media/i2c/ov965x.txt 
b/Documentation/devicetree/bindings/media/i2c/ov965x.txt
new file mode 100644
index 0000000..4ceb727
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov965x.txt
@@ -0,0 +1,45 @@
+* Omnivision OV9650/9652/9655 CMOS sensor
+
+The Omnivision OV965x sensor support multiple resolutions output, such as
+CIF, SVGA, UXGA. It also can support YUV422/420, RGB565/555 or raw RGB
+output format.
+
+Required Properties:
+- compatible: should be one of
+       "ovti,ov9650"
+       "ovti,ov9652"
+       "ovti,ov9655"
+- clocks: reference to the mclk input clock.
+
+Optional Properties:
+- resetb-gpios: reference to the GPIO connected to the RESETB pin, if any,
+               polarity is active low.
+- pwdn-gpios: reference to the GPIO connected to the PWDN pin, if any,
+               polarity is active high.
+- avdd-supply: reference to the analog power supply regulator connected
+               to the AVDD pin, if any.
+- dvdd-supply: reference to the digital power supply regulator connected
+               to the DVDD pin, if any.
+- dovdd-supply: reference to the digital I/O power supply regulator
+               connected to the DOVDD pin, if any.
+
+The device node must contain one 'port' child node for its digital output
+video port, in accordance with the video interface bindings defined in
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+
+&i2c2 {
+       ov9655: camera@30 {
+               compatible = "ovti,ov9655";
+               reg = <0x30>;
+               pwdn-gpios = <&gpioh 13 GPIO_ACTIVE_HIGH>;
+               clocks = <&clk_ext_camera>;
+
+               port {
+                       ov9655: endpoint {
+                               remote-endpoint = <&dcmi_0>;
+                       };
+               };
+       };
+};
-- 
1.9.1

Reply via email to