On Thu, Jul 06, 2017 at 03:07:05PM +0530, Vivek Gautam wrote:
> qcom,msm8996-smmu-v2 is an arm,smmu-v2 implementation with
> specific clock and power requirements. This smmu core is used
> with multiple masters on msm8996, viz. mdss, video, etc.
> Add bindings for the same.
>
> Signed-off-by: Vivek Gautam <vivek.gau...@codeaurora.org>
> ---
> Documentation/devicetree/bindings/iommu/arm,smmu.txt | 18 ++++++++++++++++++
> drivers/iommu/arm-smmu.c | 13 +++++++++++++
> 2 files changed, 31 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.txt
> b/Documentation/devicetree/bindings/iommu/arm,smmu.txt
> index 00331752d355..5d8e79775fae 100644
> --- a/Documentation/devicetree/bindings/iommu/arm,smmu.txt
> +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.txt
> @@ -17,6 +17,7 @@ conditions.
> "arm,mmu-401"
> "arm,mmu-500"
> "cavium,smmu-v2"
> + "qcom,msm8996-smmu-v2"
>
> depending on the particular implementation and/or the
> version of the architecture implemented.
> @@ -74,11 +75,16 @@ conditions.
> - clock-names: Should be "tcu" and "iface" for "arm,mmu-400",
> "arm,mmu-401" and "arm,mmu-500"
>
> + Should be "bus", and "iface" for "qcom,msm8996-smmu-v2"
> + implementation.
> +
> "tcu" clock is required for smmu's register access using
> the
> programming interface and ptw for downstream bus access.
> This
> clock is also used for access to the TBU connected to the
> master locally. Sometimes however, TBU is clocked along
> with
> the master.
> + "bus" clock for "qcom,msm8996-smmu-v2" is requierd for
> downstream
s/requierd/required/
> + bus access and for the smmu ptw.
>
> "iface" clock is required to access the TCU's programming
> interface, apart from the "tcu" clock.
> @@ -161,3 +167,15 @@ conditions.
> iommu-map = <0 &smmu3 0 0x400>;
> ...
> };
> +
> + /* Qcom's arm,smmu-v2 implementation for msm8996 */
> + smmu4: iommu {
> + compatible = "qcom,msm8996-smmu-v2";
No registers?
> + ...
> + #iommu-cells = <1>;
> + power-domains = <&mmcc MDSS_GDSC>;
> +
> + clocks = <&mmcc SMMU_MDP_AXI_CLK>,
> + <&mmcc SMMU_MDP_AHB_CLK>;
> + clock-names = "bus", "iface";
> + };
