When ae_dev doesn't support DCB, DEFAULT_DV must be set to
a lower value, otherwise the buffer allocation process will
fail.
This patch fix it by setting it to 30K bytes.
Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility
Layer Support")
Signed-off-by: Yunsheng Lin <linyunsh...@huawei.com>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 1 +
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 6 +++++-
2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
index c2b613b..30e2ad5 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
@@ -688,6 +688,7 @@ struct hclge_reset_tqp_queue {
#define HCLGE_DEFAULT_TX_BUF 0x4000 /* 16k bytes */
#define HCLGE_TOTAL_PKT_BUF 0x108000 /* 1.03125M bytes */
#define HCLGE_DEFAULT_DV 0xA000 /* 40k byte */
+#define HCLGE_DEFAULT_NON_DCB_DV 0x7800 /* 30K byte */
#define HCLGE_TYPE_CRQ 0
#define HCLGE_TYPE_CSQ 1
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index c515b84..1876418 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -1444,7 +1444,11 @@ static bool hclge_is_rx_buf_ok(struct hclge_dev *hdev,
u32 rx_all)
tc_num = hclge_get_tc_num(hdev);
pfc_enable_num = hclge_get_pfc_enalbe_num(hdev);
- shared_buf_min = 2 * hdev->mps + HCLGE_DEFAULT_DV;
+ if (hnae3_dev_dcb_supported(hdev))
+ shared_buf_min = 2 * hdev->mps + HCLGE_DEFAULT_DV;
+ else
+ shared_buf_min = 2 * hdev->mps + HCLGE_DEFAULT_NON_DCB_DV;
+
shared_buf_tc = pfc_enable_num * hdev->mps +
(tc_num - pfc_enable_num) * hdev->mps / 2 +
hdev->mps;
--
1.9.1
