From: Srinivas Kandagatla <srinivas.kandaga...@linaro.org>
This patch enables regulators and gpios for the Qualcomm QCA6174 BT/WLAN
combo controller.
Signed-off-by: Srinivas Kandagatla <srinivas.kandaga...@linaro.org>
Signed-off-by: Thierry Escande <thierry.esca...@linaro.org>
---
v7:
- New patch in this patchset
.../boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi | 22 +++++++++++++++
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 31 ++++++++++++++++++++++
2 files changed, 53 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi
b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi
index 59b29ddfb6e9..5d50f45c4df7 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi
@@ -14,6 +14,28 @@
};
};
+ bt_en_gpios: bt_en_gpios {
+ pinconf {
+ pins = "gpio19";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ output-low;
+ power-source = <PM8994_GPIO_S4>; // 1.8V
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ bias-pull-down;
+ };
+ };
+
+ wlan_en_gpios: wlan_en_gpios {
+ pinconf {
+ pins = "gpio8";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ output-low;
+ power-source = <PM8994_GPIO_S4>; // 1.8V
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ bias-pull-down;
+ };
+ };
+
volume_up_gpio: pm8996_gpio2 {
pinconf {
pins = "gpio2";
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index 1c8f1b86472d..ec5e6eee0a7a 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -139,9 +139,40 @@
pinctrl-0 = <&usb2_vbus_det_gpio>;
};
+ bt_en: bt-en-1-8v {
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_en_gpios>;
+ compatible = "regulator-fixed";
+ regulator-name = "bt-en-regulator";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ /* WLAN card specific delay */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ wlan_en: wlan-en-1-8v {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_en_gpios>;
+ compatible = "regulator-fixed";
+ regulator-name = "wlan-en-regulator";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&pm8994_gpios 8 0>;
+
+ /* WLAN card specific delay */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
agnoc@0 {
qcom,pcie@600000 {
+ status = "okay";
perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>;
+ vddpe-supply = <&wlan_en>;
+ vddpe1-supply = <&bt_en>;
};
qcom,pcie@608000 {
--
2.14.1
