From: Pramod Kumar <pramod.ku...@broadcom.com>
Add binding document for supported thermal implementation
in Stingray.
Signed-off-by: Pramod Kumar <pramod.ku...@broadcom.com>
Reviewed-by: Ray Jui <ray....@broadcom.com>
Reviewed-by: Scott Branden <scott.bran...@broadcom.com>
Reviewed-by: Srinath Mannam <srinath.man...@broadcom.com>
---
.../bindings/thermal/brcm,sr-thermal.txt | 45 ++++++++++++++++++++++
1 file changed, 45 insertions(+)
create mode 100644
Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
diff --git a/Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
b/Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
new file mode 100644
index 0000000..33f9e11
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
@@ -0,0 +1,45 @@
+* Broadcom Stingray Thermal
+
+This binding describes thermal sensors that is part of Stingray SoCs.
+
+Required properties:
+- compatible : Must be "brcm,sr-thermal"
+- reg : memory where tmon data will be available.
+
+Example:
+ tmons {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ tmon_ihost0: thermal@8f100000 {
+ compatible = "brcm,sr-thermal";
+ reg = <0x8f100000 0x4>;
+ };
+
+ tmon_ihost1: thermal@8f100004 {
+ compatible = "brcm,sr-thermal";
+ reg = <0x8f100004 0x4>;
+ };
+
+ tmon_ihost2: thermal@8f100008 {
+ compatible = "brcm,sr-thermal";
+ reg = <0x8f100008 0x4>;
+ };
+
+ tmon_ihost3: thermal@8f10000c {
+ compatible = "brcm,sr-thermal";
+ reg = <0x8f10000c 0x4>;
+ };
+
+ tmon_crmu: thermal@8f100010 {
+ compatible = "brcm,sr-thermal";
+ reg = <0x8f100010 0x4>;
+ };
+
+ tmon_nitro: thermal@8f100014 {
+ compatible = "brcm,sr-thermal";
+ reg = <0x8f100014 0x4>;
+ };
+ };
--
2.7.4
