[PATCH] leds: add APU3 dmi information to leds-apu

[Florian Eckert]

This driver should also get loaded if this is a APU3 from PC Engines.
It has the same pin layout for leds.

Signed-off-by: Florian Eckert <f...@dev.tdt.de>
---
 drivers/leds/leds-apu.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/leds/leds-apu.c b/drivers/leds/leds-apu.c
index 8c93d68964c7..1ed1c5a5dc77 100644
--- a/drivers/leds/leds-apu.c
+++ b/drivers/leds/leds-apu.c
@@ -134,6 +134,14 @@ static const struct dmi_system_id apu_led_dmi_table[] 
__initconst = {
                        DMI_MATCH(DMI_BOARD_NAME, "PC Engines apu2")
                }
        },
+       /* PC Engines APU3 with "Legancy" bios >= 4.0.7 */
+       {
+               .ident = "apu3",
+               .matches = {
+                       DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
+                       DMI_MATCH(DMI_BOARD_NAME, "APU3")
+               }
+       },
        {}
 };
 MODULE_DEVICE_TABLE(dmi, apu_led_dmi_table);
@@ -229,6 +237,7 @@ static int __init apu_led_probe(struct platform_device 
*pdev)
                apu_led->num_led_instances = ARRAY_SIZE(apu1_led_profile);
                apu_led->iosize = APU1_IOSIZE;
        } else if (dmi_match(DMI_BOARD_NAME, "APU2") ||
+                  dmi_match(DMI_BOARD_NAME, "APU3") ||
                   dmi_match(DMI_BOARD_NAME, "apu2") ||
                   dmi_match(DMI_BOARD_NAME, "PC Engines apu2")) {
                apu_led->profile = apu2_led_profile;
@@ -258,6 +267,7 @@ static int __init apu_led_init(void)
        }
        if (!(dmi_match(DMI_PRODUCT_NAME, "APU") ||
              dmi_match(DMI_PRODUCT_NAME, "APU2") ||
+             dmi_match(DMI_PRODUCT_NAME, "APU3") ||
              dmi_match(DMI_PRODUCT_NAME, "apu2") ||
              dmi_match(DMI_PRODUCT_NAME, "PC Engines apu2"))) {
                pr_err("Unknown PC Engines board: %s\n",
-- 
2.11.0