Add a new device driver "gpio-apu" which will handle the GPIOs on APU2 and APU3 devices from PC Engines.
APU2 (https://pcengines.ch/schema/apu2c.pdf page 7): - G32 is "button_reset" connected to the smd-button on the frontpanel - G50 is "mpcie2_reset" connected to mPCIe2 reset line - G51 is "mpcie3_reset" connected to mPCIe3 reset line APU3 (https://pcengines.ch/schema/apu3c.pdf page 7): - G32 is "button_reset" connected to the smd-button on the frontpanel - G50 is "mpcie2_reset" connected to mPCIe2 reset line - G51 is "mpcie3_reset" connected to mPCIe3 reset line - G33 is "simswap" connected to SIM switch IC to swap the SIM between mPCIe2 and mPCIe3 slot Signed-off-by: Florian Eckert <f...@dev.tdt.de> --- drivers/gpio/Kconfig | 7 ++ drivers/gpio/Makefile | 1 + drivers/gpio/gpio-apu.c | 288 ++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 296 insertions(+) create mode 100644 drivers/gpio/gpio-apu.c diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 833a1b51c948..e89937f6051e 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -117,6 +117,13 @@ config GPIO_AMDPT driver for GPIO functionality on Promontory IOHub Require ACPI ASL code to enumerate as a platform device. +config GPIO_APU + tristate "PC Engines APU2/APU3 GPIO support" + depends on X86 + help + Say Y here to support GPIO functionality on APU2/APU3 boards + from PC Engines. + config GPIO_ASPEED tristate "Aspeed GPIO support" depends on (ARCH_ASPEED || COMPILE_TEST) && OF_GPIO diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 671c4477c951..9c27523fb189 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -29,6 +29,7 @@ obj-$(CONFIG_GPIO_ALTERA) += gpio-altera.o obj-$(CONFIG_GPIO_ALTERA_A10SR) += gpio-altera-a10sr.o obj-$(CONFIG_GPIO_AMD8111) += gpio-amd8111.o obj-$(CONFIG_GPIO_AMDPT) += gpio-amdpt.o +obj-$(CONFIG_GPIO_APU) += gpio-apu.o obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o obj-$(CONFIG_GPIO_ATH79) += gpio-ath79.o obj-$(CONFIG_GPIO_ASPEED) += gpio-aspeed.o diff --git a/drivers/gpio/gpio-apu.c b/drivers/gpio/gpio-apu.c new file mode 100644 index 000000000000..609972d11847 --- /dev/null +++ b/drivers/gpio/gpio-apu.c @@ -0,0 +1,288 @@ +// SPDX-License-Identifier: GPL-2.0 +/* PC Engines APU2/APU3 GPIO device driver + * + * Copyright (C) 2018 Florian Eckert <f...@dev.tdt.de> + */ + +#include <linux/bits.h> +#include <linux/dmi.h> +#include <linux/err.h> +#include <linux/gpio/driver.h> +#include <linux/input.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#define APU_FCH_ACPI_MMIO_BASE 0xFED80000 +#define APU_FCH_GPIO_BASE (APU_FCH_ACPI_MMIO_BASE + 0x1500) +#define APU_GPIO_BIT_RD 16 +#define APU_GPIO_BIT_WR 22 +#define APU_GPIO_BIT_DIR 23 + +struct apu_gpio_pdata { + struct gpio_chip chip; + unsigned long *offset; /* base register offset */ + void __iomem **addr; /* remapped iomem addresses */ + spinlock_t lock; /* lock register access */ +}; + +static struct platform_device *apu_gpio_pdev; + +/* APU2 */ +static unsigned long apu2_gpio_offset[] = { + APU_FCH_GPIO_BASE + 89 * sizeof(u32), + APU_FCH_GPIO_BASE + 67 * sizeof(u32), + APU_FCH_GPIO_BASE + 66 * sizeof(u32), +}; +static const char * const apu2_gpio_names[] = { + "button_reset", + "mpcie2_reset", + "mpcie3_reset", +}; + +/* APU3 */ +static unsigned long apu3_gpio_offset[] = { + APU_FCH_GPIO_BASE + 89 * sizeof(u32), + APU_FCH_GPIO_BASE + 67 * sizeof(u32), + APU_FCH_GPIO_BASE + 66 * sizeof(u32), + APU_FCH_GPIO_BASE + 90 * sizeof(u32), +}; +static const char * const apu3_gpio_names[] = { + "button_reset", + "mpcie2_reset", + "mpcie3_reset", + "simswap", +}; + +static int gpio_apu_get_dir(struct gpio_chip *chip, unsigned int offset) +{ + u32 val; + struct apu_gpio_pdata *apu_gpio = gpiochip_get_data(chip); + + spin_lock(&apu_gpio->lock); + + val = ~ioread32(apu_gpio->addr[offset]); + + spin_unlock(&apu_gpio->lock); + + return !!(val & BIT(APU_GPIO_BIT_DIR)); +} + +static int gpio_apu_dir_in(struct gpio_chip *chip, unsigned int offset) +{ + u32 val; + struct apu_gpio_pdata *apu_gpio = gpiochip_get_data(chip); + + spin_lock(&apu_gpio->lock); + + val = ioread32(apu_gpio->addr[offset]); + val &= ~BIT(APU_GPIO_BIT_DIR); + iowrite32(val, apu_gpio->addr[offset]); + + spin_unlock(&apu_gpio->lock); + + return 0; +} + +static int gpio_apu_dir_out(struct gpio_chip *chip, unsigned int offset, + int value) +{ + u32 val; + struct apu_gpio_pdata *apu_gpio = gpiochip_get_data(chip); + + spin_lock(&apu_gpio->lock); + + val = ioread32(apu_gpio->addr[offset]); + val |= BIT(APU_GPIO_BIT_DIR); + iowrite32(val, apu_gpio->addr[offset]); + + spin_unlock(&apu_gpio->lock); + + return 0; +} + +static int gpio_apu_get_data(struct gpio_chip *chip, unsigned int offset) +{ + u32 val; + struct apu_gpio_pdata *apu_gpio = gpiochip_get_data(chip); + + spin_lock(&apu_gpio->lock); + + val = ioread32(apu_gpio->addr[offset]); + + spin_unlock(&apu_gpio->lock); + + return !!(val & BIT(APU_GPIO_BIT_RD)); +} + +static void gpio_apu_set_data(struct gpio_chip *chip, unsigned int offset, + int value) +{ + u32 val; + struct apu_gpio_pdata *apu_gpio = gpiochip_get_data(chip); + + spin_lock(&apu_gpio->lock); + + val = ioread32(apu_gpio->addr[offset]); + if (value) + val |= BIT(APU_GPIO_BIT_WR); + else + val &= ~BIT(APU_GPIO_BIT_WR); + iowrite32(val, apu_gpio->addr[offset]); + + spin_unlock(&apu_gpio->lock); +} + +static const struct dmi_system_id apu2_gpio_dmi_table[] __initconst = { + /* PC Engines APU2 with "Legacy" bios < 4.0.8 */ + { + .ident = "apu2", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"), + DMI_MATCH(DMI_BOARD_NAME, "APU2") + } + }, + /* PC Engines APU2 with "Legacy" bios >= 4.0.8 */ + { + .ident = "apu2", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"), + DMI_MATCH(DMI_BOARD_NAME, "apu2") + } + }, + /* PC Engines APU2 with "Mainline" bios */ + { + .ident = "apu2", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"), + DMI_MATCH(DMI_BOARD_NAME, "PC Engines apu2") + } + }, + {} +} +MODULE_DEVICE_TABLE(dmi, apu2_gpio_dmi_table); + +static const struct dmi_system_id apu3_gpio_dmi_table[] __initconst = { + /* PC Engines APU3 with "Legacy" bios < 4.0.8 */ + { + .ident = "apu3", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"), + DMI_MATCH(DMI_BOARD_NAME, "APU3") + } + }, + /* PC Engines APU3 with "Legacy" bios >= 4.0.8 */ + { + .ident = "apu3", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"), + DMI_MATCH(DMI_BOARD_NAME, "apu3") + } + }, + /* PC Engines APU3 with "Mainline" bios */ + { + .ident = "apu3", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"), + DMI_MATCH(DMI_BOARD_NAME, "PC Engines apu3") + } + }, + {} +}; +MODULE_DEVICE_TABLE(dmi, apu3_gpio_dmi_table); + +static int __init apu_gpio_probe(struct platform_device *pdev) +{ + unsigned int i; + struct apu_gpio_pdata *apu_gpio; + + apu_gpio = devm_kzalloc(&pdev->dev, sizeof(*apu_gpio), GFP_KERNEL); + if (!apu_gpio) + return -ENOMEM; + + platform_set_drvdata(pdev, apu_gpio); + spin_lock_init(&apu_gpio->lock); + + apu_gpio->chip.label = KBUILD_MODNAME; + apu_gpio->chip.base = 20; + apu_gpio->chip.get_direction = gpio_apu_get_dir; + apu_gpio->chip.direction_input = gpio_apu_dir_in; + apu_gpio->chip.direction_output = gpio_apu_dir_out; + apu_gpio->chip.get = gpio_apu_get_data; + apu_gpio->chip.set = gpio_apu_set_data; + + if (dmi_check_system(apu3_gpio_dmi_table)) { + apu_gpio->addr = devm_kzalloc(&pdev->dev, + sizeof(apu3_gpio_offset), + GFP_KERNEL); + + if (!apu_gpio->addr) + return -ENOMEM; + + apu_gpio->offset = apu3_gpio_offset; + apu_gpio->chip.names = apu3_gpio_names; + apu_gpio->chip.ngpio = ARRAY_SIZE(apu3_gpio_offset); + for (i = 0; i < ARRAY_SIZE(apu3_gpio_offset); i++) { + apu_gpio->addr[i] = devm_ioremap(&pdev->dev, + apu_gpio->offset[i], sizeof(u32)); + if (!apu_gpio->addr[i]) + return -ENOMEM; + } + } else if (dmi_check_system(apu2_gpio_dmi_table)) { + apu_gpio->addr = devm_kzalloc(&pdev->dev, + sizeof(apu2_gpio_offset), + GFP_KERNEL); + + if (!apu_gpio->addr) + return -ENOMEM; + + apu_gpio->offset = apu2_gpio_offset; + apu_gpio->chip.names = apu2_gpio_names; + apu_gpio->chip.ngpio = ARRAY_SIZE(apu2_gpio_offset); + for (i = 0; i < ARRAY_SIZE(apu2_gpio_offset); i++) { + apu_gpio->addr[i] = devm_ioremap(&pdev->dev, + apu_gpio->offset[i], sizeof(u32)); + if (!apu_gpio->addr[i]) + return -ENOMEM; + } + } + + return devm_gpiochip_add_data(&pdev->dev, &apu_gpio->chip, apu_gpio); +} + +static struct platform_driver apu_gpio_driver = { + .driver = { + .name = KBUILD_MODNAME, + }, + .probe = apu_gpio_probe, +}; + +static int __init apu_gpio_init(void) +{ + if (!(dmi_check_system(apu2_gpio_dmi_table)) && + !(dmi_check_system(apu3_gpio_dmi_table))) { + pr_err("No PC Engines board detected\n"); + return -ENODEV; + } + + apu_gpio_pdev = platform_device_register_simple(KBUILD_MODNAME, + -1, NULL, 0); + if (IS_ERR(apu_gpio_pdev)) + return PTR_ERR(apu_gpio_pdev); + + + return platform_driver_register(&apu_gpio_driver); +} + +static void __exit apu_gpio_exit(void) +{ + platform_device_unregister(apu_gpio_pdev); + platform_driver_unregister(&apu_gpio_driver); +} + +module_init(apu_gpio_init); +module_exit(apu_gpio_exit); + +MODULE_AUTHOR("Florian Eckert"); +MODULE_DESCRIPTION("PC Engines APU2/APU3 family GPIO driver"); +MODULE_LICENSE("GPL v2"); -- 2.11.0
