From: Honghui Zhang <honghui.zh...@mediatek.com>
The "num-lanes" property is not used, remove it.
Signed-off-by: Honghui Zhang <honghui.zh...@mediatek.com>
---
Documentation/devicetree/bindings/pci/mediatek-pcie.txt | 8 --------
1 file changed, 8 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
index 20227a8..92437a3 100644
--- a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
@@ -65,7 +65,6 @@ Required properties:
explanation.
- ranges: Sub-ranges distributed from the PCIe controller node. An empty
property is sufficient.
-- num-lanes: Number of lanes to use for this port.
Examples for MT7623:
@@ -118,7 +117,6 @@ Examples for MT7623:
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193
IRQ_TYPE_LEVEL_LOW>;
ranges;
- num-lanes = <1>;
};
pcie@1,0 {
@@ -129,7 +127,6 @@ Examples for MT7623:
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194
IRQ_TYPE_LEVEL_LOW>;
ranges;
- num-lanes = <1>;
};
pcie@2,0 {
@@ -140,7 +137,6 @@ Examples for MT7623:
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195
IRQ_TYPE_LEVEL_LOW>;
ranges;
- num-lanes = <1>;
};
};
@@ -172,7 +168,6 @@ Examples for MT2712:
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
- num-lanes = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie_intc0 0>,
<0 0 0 2 &pcie_intc0 1>,
@@ -191,7 +186,6 @@ Examples for MT2712:
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
- num-lanes = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie_intc1 0>,
<0 0 0 2 &pcie_intc1 1>,
@@ -245,7 +239,6 @@ Examples for MT7622:
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
- num-lanes = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie_intc0 0>,
<0 0 0 2 &pcie_intc0 1>,
@@ -264,7 +257,6 @@ Examples for MT7622:
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
- num-lanes = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie_intc1 0>,
<0 0 0 2 &pcie_intc1 1>,
--
2.6.4
