From: Michael Hennerich <[EMAIL PROTECTED]> Signed-off-by: Michael Hennerich <[EMAIL PROTECTED]> Signed-off-by: Bryan Wu <[EMAIL PROTECTED]> --- include/asm-blackfin/mach-bf548/bfin_serial_5xx.h | 39 ++++++++++----------- 1 files changed, 19 insertions(+), 20 deletions(-)
diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h index 2f4afc9..f21a162 100644 --- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h @@ -1,5 +1,6 @@ #include <linux/serial.h> #include <asm/dma.h> +#include <asm/portmux.h> #define NR_PORTS 4 @@ -143,50 +144,48 @@ struct bfin_serial_res bfin_serial_resource[] = { int nr_ports = ARRAY_SIZE(bfin_serial_resource); +#define DRIVER_NAME "bfin-uart" + static void bfin_serial_hw_init(struct bfin_serial_port *uart) { #ifdef CONFIG_SERIAL_BFIN_UART0 - /* Enable UART0 RX and TX on pin 7 & 8 of PORT E */ - bfin_write_PORTE_FER(0x180 | bfin_read_PORTE_FER()); - bfin_write_PORTE_MUX(0x3C000 | bfin_read_PORTE_MUX()); + peripheral_request(P_UART0_TX, DRIVER_NAME); + peripheral_request(P_UART0_RX, DRIVER_NAME); #endif #ifdef CONFIG_SERIAL_BFIN_UART1 - /* Enable UART1 RX and TX on pin 0 & 1 of PORT H */ - bfin_write_PORTH_FER(0x3 | bfin_read_PORTH_FER()); - bfin_write_PORTH_MUX(~0xF & bfin_read_PORTH_MUX()); + peripheral_request(P_UART1_TX, DRIVER_NAME); + peripheral_request(P_UART1_RX, DRIVER_NAME); + #ifdef CONFIG_BFIN_UART1_CTSRTS - /* Enable UART1 RTS and CTS on pin 9 & 10 of PORT E */ - bfin_write_PORTE_FER(0x600 | bfin_read_PORTE_FER()); - bfin_write_PORTE_MUX(~0x3C0000 & bfin_read_PORTE_MUX()); + peripheral_request(P_UART1_RTS, DRIVER_NAME); + peripheral_request(P_UART1_CTS DRIVER_NAME); #endif #endif #ifdef CONFIG_SERIAL_BFIN_UART2 - /* Enable UART2 RX and TX on pin 4 & 5 of PORT B */ - bfin_write_PORTB_FER(0x30 | bfin_read_PORTB_FER()); - bfin_write_PORTB_MUX(~0xF00 & bfin_read_PORTB_MUX()); + peripheral_request(P_UART2_TX, DRIVER_NAME); + peripheral_request(P_UART2_RX, DRIVER_NAME); #endif #ifdef CONFIG_SERIAL_BFIN_UART3 - /* Enable UART3 RX and TX on pin 6 & 7 of PORT B */ - bfin_write_PORTB_FER(0xC0 | bfin_read_PORTB_FER()); - bfin_write_PORTB_MUX(~0xF000 | bfin_read_PORTB_MUX()); + peripheral_request(P_UART3_TX, DRIVER_NAME); + peripheral_request(P_UART3_RX, DRIVER_NAME); + #ifdef CONFIG_BFIN_UART3_CTSRTS - /* Enable UART3 RTS and CTS on pin 2 & 3 of PORT B */ - bfin_write_PORTB_FER(0xC | bfin_read_PORTB_FER()); - bfin_write_PORTB_MUX(~0xF0 | bfin_read_PORTB_MUX()); + peripheral_request(P_UART3_RTS, DRIVER_NAME); + peripheral_request(P_UART3_CTS DRIVER_NAME); #endif #endif SSYNC(); #ifdef CONFIG_SERIAL_BFIN_CTSRTS if (uart->cts_pin >= 0) { - gpio_request(uart->cts_pin, NULL); + gpio_request(uart->cts_pin, DRIVER_NAME); gpio_direction_input(uart->cts_pin); } if (uart->rts_pin >= 0) { - gpio_request(uart->rts_pin, NULL); + gpio_request(uart->rts_pin, DRIVER_NAME); gpio_direction_output(uart->rts_pin); } #endif -- 1.5.2 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/